Manual Watts WFHTRF 010 -20433 (page 8 of 18) (English, Spanish)

668531

Zoom out

Zoom in

1/18

PPL IMP 1234A

PROGRAM menu :

By pressing & keys the Program number starts to blink,

and use

& to see the

Then use

& to other days in the program

Select the program

Shows the daily program

If you select a built-in program “P1 to P9” and press this program will be followed in

Built-in programs description

P1 Morning, Evening & Week-end P6 Morning, Afternoon & Week-end

P2 Morning, Midi, Evening & Week-end P7 7h - 19h (Office)

P3 Day & Week-end P8 8h - 19h , Saturday (Shop)

P4 Evening & Week-end P9 Week-end (Secondary House)

P5 Morning, Evening (bathroom)

If you select a built-in program ”U1 to U4” and press you will enter in user program edition.

USER PROGRAM EDITION day

Hour at the cursor position

The key sets temperature at the current blinking program hour

The

key sets temperature at the current blinking program hour

Use & keys to slide the blinking cursor position in the day and modify or correct easily the

program. When the displayed day is correct press to jump to the following day.

When you press

on day 7 you return to the top menu

Now your user program will be followed if you put the MILUX RF in

operating mode.

Set CLOCK Menu :

Use this menu to adjust the clock .

Use & to

ajust the minutes.

Press key

Use &

Adjust the hours.

Press key

Use &

Adjust the day

Press key

COMFORT operating mode :

By pressing & keys the comfort

temperature starts to blink and can be adjusted.

The room temperature

reappears after a few

seconds

The MILUX RF regulation will now follow

indefinitely the comfort temperature.

AUTOMATIC operating mode:

MILUX RF will follow automatically the program

according to the actual time

By pressing & key you can override the

current set temperature until the next change in

the program.

The segment will lit up. Use & keys

to adjust the temporary required temperature.

At the next program change the will

disappear and the program continues without any

alteration.

RADIO CONFIGURATION WITH THE RECEIVER

1. To assign the MILUX RF thermostat with the receiver you must put the receiver in “RF init”

mode, please refer to the receiver leaflet.

(In this mode the thermostat should be near the

receiver)

2. On the MILUX RF, select

operating mode.

Then press the key during 5 seconds,

you will enter in the Radio configuration mode (

The MILUX RF is now sending by radio signal its configuration address 4 times per second,

3. You can now perform a radio range verification.

Place the MILUX RF in the room where you need to regulate the temperature and leave it in

Radio configuration mode ( ).

Close the doors and come back to the Receiver.

Verify that the green LED blinks at each radio signal received :

- If it blinks regularly 4 times per second, the installation of the MILUX RF and Receiver is

correct.

- If it blinks irregularly, you are at the range limit. Install the MILUX RF closer to the Receiver.

- If it does not blink at all, you are out of range. Install the MILUX RF closer to the Receiver.

4. On the MILUX RF press on the key to exit the Radio configuration mode.

Now your MILUX RF controls the Receiver.

• Wireless communication by radio signal to

the receiver connected to the

installation.

Range of approximately 30m in

residential environment.

• 7 day program

• 9 Built-in programs and 4 User programs

• Program graphic display

• Room temperature and time display

• Comfort / Reduced / Anti-freeze

temperatures

• Temporary temperature override

• Automatic or Manual operation

• Holiday function

• Keypad lock function (child safety)

• Battery operated, life >2 years

• Battery weakness display

• Battery replacement without loss of

the program memory (<1minute)

• Reset function

• ITCS function (optional). Intelligent

Temperature Control System.

1: Heater in operation

2: Temperature overridden

3: Holiday function activated

4: Operating mode menu

5: Batteries weak

6: Day of the week

7: Time

8: Current day graphic program display

and radio transmission activity

9: If lit-up 10 display the current room temperature

10: Room tem

erature or set tem

erature

REDUCED operating mode :

By pressing & keys the comfort

temperature starts to blink and can be

adjusted.

The room temperature

reappears after

a few seconds

The MILUX RF regulation will now follow

indefinitely the reduced temperature.

ANTI FREEZE operating mode:

Prevent your installation from freezing.

By pressing

& keys the anti freeze

temperature starts to blink and can be

adjusted.

The room temperature

reappears after a

few seconds

Now the MILUX RF will keep the

temperature above freezing.

OFF mode :

Use this mode if your Heating installation

needs to be turned OFF.

The MILUX RF will switch off the

installation and then switch itself OFF

(blank screen).

User programs are saved, time is kept

running and battery consumption becomes

very low.

Any key will wake up the MILUX RF.

The key display the actual room

temperature.

DANGER: has your thermostat is

stopped YOUR INSTALLATION CAN

FREEZE.

HOLIDAY Function :

With & keys, go to function. Then select with & keys the delay in hours

( H ) if below 24h then in days ( d ). Then select a mode or or .

The logo is active and the number of hours/days left is displayed until the MILUX RF

returns in mode and continues to follow the program.

KEYPAD LOCK Function :

Function to prevent any modification of the parameters.

In , , , and operating modes you can maintain the key pressed and

press simultaneously on the or key to lock ( ) or unlock ( ) the

keypad.

RESET Function :

Erase all user programs and sets the factory parameters by default.

Go to mode, maintain & keys pressed and press simultaneously on the key.

All segments will lit up during a few seconds showing that the MILUX RF has been erased and

restarted with factory defaults parameters.

Factory parameters are :

Temperatures 21°C 17°C 6°C, Program U1 all comfort.

CHARACTERISTICS

MODES DESCRIPTION

DISPLA

SPECIAL FUNCTIONS

USER GUIDE

Use & keys to change the mode in the Operating mode menu

For all operating modes the receiver switch should be placed on AUTO position.

-Th

ostat

MIL

X RF

TECHNICAL CHARACTERISTICS

Operating temperature 0°C - 50°C (o 32°F – 122°F)

Measured temperature precision 0.1°C (or 0.2°F)

Set temperature precision 0.5°C (or 0.5°F)

Set temperature range

in comfort & reduced : 5°C – 35°C (or 41 - 95°F)

in anti-freeze: 0,5°C – 10°C (or 33 – 50°F)

Regulation

characteristics

Cycle: 15 minutes

Anti-short cycle: 3 minutes OFF, 2 minutes ON

Electrical Protection Class II - IP30

Batteries

3x LR6 AA 1.5V alkaline batteries (> 2 years)

IMPORTANT: You have 1 minute to change the

batteries.Past this time, you may have to reprogram

your thermostat if all segments lit up at power up.

Radio Frequency 433.92 MHz, <10mW.

Certifications

CE. EN 300220-3, EN 301489-1

(Radio frequency certifications)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Watts WFHTRF 010 -20433 in the language / languages: English, Spanish as an attachment in your email.

The manual is 4,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Watts WFHTRF 010 -20433

Watts WFHTRF 010 -20433 User Manual - English - 4 pages

Watts WFHTRF 010 -20433 User Manual - English - 2 pages

Watts WFHTRF 010 -20433 User Manual - German - 4 pages

Watts WFHTRF 010 -20433 User Manual - Dutch - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Watts WFHTRF 010 -20433 Manual

Product: