805549
11
Zoom out
Zoom in
Previous page
1/17
Next page
11
5.1.2 Multiple controller’s installation.
If there are multiple interconnected controllers in the installation, there are 1 main-controller and up to 3 sub-controllers.
The main controllers centralizes the information for the sub-controllers. If a WFC-03 HCM RF 230 is used, it should be
paired to the main-controller.
The main-controller propagates the Heat and Cool mode to the sub-controllers. This information could come from the
WFC-03 HCM RF 230 or from a Master Digital thermostat according to the DIP4 and DIP5 (See 3.3).
• The main-controller could handle the pump signal of the whole installation according to DIP1 (See 3.3).
BT-D03 RF
Main WFC-03 HC RF
Sub WFC-03 HC RFSub WFC-03 HC RF Sub WFC-03 HC RF
BT-WR02 RF (Option) WFC-03 HCM RF 230 (Option)
BT-A03 RF
Device 1 Device 2 Remarks
By pressing for 5 seconds, the
controller goes in RF pairing menu.
By using and select zone 3
(Red led), press to enter in Pairing
with a slave device mode.
All LEDs are blinking green.
Put the device in RF pairing mode.
When link is done WFC-03 HC RF and
BT-WR02 RF return to pairing mode.
This configuration allows a remote pump
output.
Exit of the controller pairing menu: Long
press on .
By pressing for 5 seconds, the
controller goes in RF pairing menu.
By using and select zone 3
(Red led), press to enter in Pairing
with a slave device mode.
All LEDs are blinking green. Put the RF repeater in RF Link mode
(press 3 seconds on the button).
When RF link is done, WFC-03 HC RF
returns to pairing mode and the led on
the repeater becomes green fix.
Exit of the controller pairing menu: Long
press on .
Led position
Key position
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Watts WFC-03 HC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Watts WFC-03 HC in the language / languages: English as an attachment in your email.

The manual is 8.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Watts WFC-03 HC

Watts WFC-03 HC Quick start guide - English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info