805493

Watts PR03 Wireless plug receiver Manual

6
Zoom out
Zoom in
Previous page
1/14
Next page
6
EN
6. Types of installation
Option 1: Vision® Smart Plug + RF thermostat for heating regulation.
1. Switch on the Smart Plug.
2. Press the Button during 3 sec to switch to RF Init.
3. The LED should be flashing Red /Green indicating that the plug is now in radio configuration mode waiting for a
thermostat configuration address.
4. Please refer to the thermostat leaflet for enter the thermostat in “RF Init” mode.
5. Then The Vision® Smart Plug LED must be switched OFF and the thermostat should exit the RF init mode
to indicate correct paring between both elements. You can pair several Vision® Smart Plug to the same RF
thermostats.
Option 2: Vision® Smart Plug + RF Thermostat + RF Central unit BT-CT02 RF or BT-CT03 RF for heating regulation
and remote control with mobile APP.
1. First step is to pair the RF thermostat to the Central unit.
2. Press the RF button on the Smart Plug during 3sec.
3. The RF LED should be flashing Red /Green indicating that the Smart Plug is now in radio configuration mode waiting
for a central configuration address.
4. Please refer to the leaflet of the Central unit for more explanation about the pairing mode “RF Init”. You must pair the
Smart Plug as a heating device in the Central unit.
5. The RF LED on the Smart Plug will switch OFF and the Central will show a message to indicate correct pairing
between both elements. You can pair several receivers in the same room.
Option 3: Vision® Smart Plug + RF Central unit BT-CT02 RF or BT-CT03 RF for ON/OFF devices or light control, timer
mode and remote control with mobile APP.
1. Press the Button 3sec to switch the Smart Plug in RF Init mode.
2. The LED should be flashing Red /Green indicating that the Smart Plug is now in radio configuration mode waiting for
a central configuration address.
3. Please refer to the leaflet of the Central unit for more explanation about the pairing mode “RF Init”. You must pair the
Receiver as an ON/OFF plug or a light in the Central unit.
4. The LED on the Smart Plug will switch OFF and the Central will show a message to indicate correct pairing between
both elements. You can pair several receivers in the same room. Receiver will work in Timer mode; you have the
possibility to create a weekly program for ON/OFF period.
or ON/OFF
Note for installations 2 and 3:
• You can pair several receivers. Pay attention! Before linking a new receiver with the Central unit, you have to
reset the receiver imperatively.
• In case of a thermostat in RF Alarm, the Smart Plug stops heating.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Watts PR03 Wireless plug receiver at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Watts PR03 Wireless plug receiver in the language / languages: English, French as an attachment in your email.

The manual is 2.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Watts PR03 Wireless plug receiver

Watts PR03 Wireless plug receiver Quick start guide - English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info