805575
15
Zoom out
Zoom in
Previous page
1/18
Next page
HIU2-IM-DE-W-UK-04-2021-Rev7 | Part no. 10078860 15
EN
ENGLISH
3. Connection to power mains (230V).
4. Set the desired tapping temperature on the thermostatic
head (X).
X
Setting, at max. flow rate with a supply temperature of
65 °C:
Scale 1I2I3I4I5
approx.
°C 34 37 41 44 48 51 55 58 63
5. Vent the primary (heating) circuit.
Slowly open the stop valves on the heat network connec-
tors (see Chapter 4).
Open and hold open the vent valve (see Chapter 4) until air
no longer escapes.
6. Vent the secondary circuit (domestic water).
Slowly open all of the tapping points, one after the other,
and draw water until all lines fill up and all air has been
vented from the system.
Hot water!
Severe scalding possible.
Do not reach into the hot water when
emptying the HIU2.
Ensure that the HIU 2 has cooled down
before carrying out maintenance, clean-
ing and repair work.
Install a suitable scalding protection
device at every tapping point (for exam-
ple, safety shut-off valve or thermostat
mixer tap).
More detailed information on scalding
protection can be found in DIN 1988,
sheet 2, clause 4.2.
Danger of scalding!
To avoid scalding when tapping hot water,
appropriate scalding protection must be
provided.
Observe the recognized rules of technology
when doing so.
1. Insert the HIU 2 and connect to the connection rail.
Optional:
2. Install the water hammer arrestor, circulation set and
circulation manifold.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Watts HIU 2 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Watts HIU 2 series in the language / languages: English as an attachment in your email.

The manual is 2.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info