805518
2
Zoom out
Zoom in
Previous page
1/3
Next page
PPL IMP 1585C
DISPLAY & KEY
USER GUIDE
TECHNICAL CHARACTERISTICS
Measuring accuracy
0.1°C
Operating temperature
0°C - 50°C
Setting temperature range
5° C 37° C by 0.5° C step
Regulation Characteristics
Integral proportional band or Static differential. (adjustable in the
installer’s menu)
Electrical Protection
Class II - IP21
Color
Polar White RAL 9010
LCD back light
Blue
Main Switch
Two poles 16A
Power supply
230Vac +/- 10% 50Hz
Output
Relay 16A 250Vac resistive load (AC1)
Type of external sensor
CTN 10K 3M
Software version
The version is indicated in the installer menu.
Wattstemp 760 230Vac Flush mounting digital programmable thermostat.
External sensor 10K
Descriptions
- Electronic thermostat specially
designed to control the Electrical floor
heating.
- Weekly programme per minute.
- 12 temperatures levels per day.
- Possibility to regulate either the floor or
room temperature, or combined (in this
case, the floor sensor is used as
temperature limiter)
- ON /OFF Main switch.
- Relay 16A .
- The product is supplied with two fronts
and frames (Square and round) for
system ELKO RS/B&J JUSSI and
ELJO TREND .
GB
How can you create or change a user’s program (U1 or U2).
Before, select one of the user’s programs U1 or U2 by using the joystick .
1 2 3
4 5 6
7 8 9
10 11 12
13 14 15
To program the remaining days, repeat step « 4 » to« 14 » and this for all the days of the week.
Once you have run through the whole programming, set the thermostat in the
mode.
To leave the program mode
without saving press the
key.
In program mode
you have the possibility to reset a user program separately (U1 or U2)
by pressing the
key during a few seconds when you have selected the user program (U1
or U2 must be blinking before pressing). When the program is erasedClr” is displayed.
Temperature of
the step
Starting hour of
the step
Finishing hour of
the step
Number of the
block during the
day
Identical days
End of the day Program the remaining days
Adjust the
finishing
hour of the
first step
Adjust the
temperature of
the second step
Adjust the
finishing hour
of the second
step
Adjust the
temperature
of the first
block
OK
Select the
number of
days to be
programmed
OK
1: Operating mode. (The active mode is framed)
2: Override indicator.
3: Heating indicator.
4: Keyboard locked indicator.
5: Type of sensor selected.
6: Setting temperature or parameter value
when11” is displayed.
7: Room or floor temperature indicator
only in the user’s menu.
8: Title of the parameter when “11” is displayed.
or Hour in program and Auto mode.
9: Step number in program mode.
10: Current day.
11: Installer’s or user’s menu number.
A: Escape key (to exit the current menu or reload the
factory setting value)
B: Main switch
C: Joystick (To change mode or current value)
A B C
1
7
8
6
5
3
4
11
2
9
10
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Watts EFHT-LCD weekly at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Watts EFHT-LCD weekly in the language / languages: English as an attachment in your email.

The manual is 1.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info