805483
24
Zoom out
Zoom in
Previous page
1/36
Next page
24
3. Interfaccia utente
A. Significato colori LED
Sul prodotto sono presenti due indicatori LED (1) e (2).
- (1):
o Luce rossa fissa: la pompa è attiva.
o Luce blu fissa: il deumidificatore è attivo (funzione Umidità attivata e
rilevato il valore di default).
o Luce rossa/blu lampeggiante: pompa e deumidificatore attivati.
- (2):
o Luce rossa fissa: sistema in modalità Riscaldamento.
o Luce blu fissa: sistema in modalità Raffreddamento.
o Luce verde fissa: il sistema è in modalità Collegamento RF (in attesa del
collegamento RF del BT-M6Z02-RF).
o Luce verde lampeggio veloce: il BT-HCM02-RF ha ricevuto un frame RF dal BT-
M6Z02-RF.
o Luce verde lampeggiante: errore RF o BT-HCM02-RF non collegato.
B. Pulsanti
Sul lato destro del prodotto è presente un pulsante (3).
Questo viene usato per entrare in modalità collegamento RF come indicato di seguito:
o Premere per 5 secondi.
o Il LED (2) emette una luce verde fissa.
o Ora il prodotto è pronto per il collegamento RF con il BT-M6Z02-RF
Nota: se il prodotto è in modalità Collegamento RF e si preme di nuovo il pulsante per 5 secondi, il prodotto
viene resettato: il collegamento RF viene rimosso.
C. Configurazione DIP switch
Rimuovendo il pannellino sulla parte frontale destra del BT-HCM02-RF, si accede a quattro interruttori per la
configurazione avanzata:
I quattro interruttori sono posizionati di default su OFF.
Interruttore 1: origine segnale Riscaldamento/Raffreddamento (Heat/Cool, HC). Fare riferimento al
capitolo FUNZIONI.
ON: il BT-M6Z02-RF riceve le informazioni HC dal BT-CT02-RF.
OFF: il BT-M6Z02-RF riceve le informazioni HC direttamente dagli ingressi del BT-HCM02 (sensore
dell'acqua O contatto pulito ingresso).
Interruttore 2: funzione Umidità
ON: la funzione è disattivata (l'uscita del deumidificatore non è attiva).
OFF: la funzione è attiva, ovvero quando nel sistema si rileva il valore di umidità predefinito, l'uscita del
deumidificatore è attiva.
Interruttore 3: intervallo di tempo precedente al passaggio alla modalità
Riscaldamento/Raffreddamento (HC).
ON: l'interruttore HC è attivo 2 secondi dopo il rilevamento della modifica.
OFF: l'interruttore HC è attivo 5 minuti dopo il rilevamento della modifica.
Interruttore 4: Comando Caldo Freddo manuale o automatico.
ON: Le uscite di richiesta caldo o freddo sono gestite automaticamente, seguendo le richieste del Sistema
(Es: in modalità riscaldamento, se almeno una zona richiede calore l’uscita relativa al contatto Calore sarà ON
viceversa l’uscita Calore sarà OFF)
OFF: Le uscite di richiesta caldo o freddo sono forzate sempre accese in Caldo o Freddo in base alla
configurazione del sistema (Es: Se il sistema è configurato in caldo, l’uscita relativa al comando Calore sarà
sempre ON anche quando non c’è nessun Termostato che richiede calore).
(1) (2)
(3)
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Watts BT-HCM02 - Heat and cool module at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Watts BT-HCM02 - Heat and cool module in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info