You can drive directly up to 3600W(16A) with your receiver (fig7),
Mounting instruction:
•If a floor sensor is installed, it must be placed into a separate protective flexible tube.
•In this case check the good configuration of the thermostat () linked with your receiver.
•For security reason and easy mounting we recommend to connect only one loop to each receiver, in case of you can use other receivers linked the same
thermostat (fig6) or use an external connection box (fig7).
If your installation uses the pilot wire, don’t forget to active the Pilot Wire function on the parameter menu of thermostat
FR
Vous pouvez piloter une puissance de 3600W (16A) directement avec les récepteurs (fig7),
Instruction de montage:
•Si un capteur de sol est installé, il faudra obligatoirement le placer dans une gaine séparée.
•Dans ce cas-là n’oubliez pas de vérifier la configuration du thermostat.
•Pour des raisons de sécurité et de facilité de câblage, nous préconisons de connecter seulement une seule trame de PRE sur chaque, dans le cas contraire
vous pourrez utiliser un autre récepteur appairé au même thermostat (fig7), ou encore utiliser une boite de jonction externe.
Si votre installation utilise le Fil Pilote, n’oubliez pas d’activer la fonction Fil Pilote depuis le menu paramètre de votre thermostat.
DE
An den Empfänger können 3600 W (16A) direkt angeschlossen werden (Abb. 7)
Installationsanweisung:
•Falls ein Fußbodenfühler verwendet wird, ist dieser in einemseparaten,biegsamen Schutzrohr zu platzieren.
In diesem Fall ist auf die korrekte Einstellung des mit dem Funk-Empfänger gepaarten Funk-Raumfühler() zu achten.
•Aus Sicherheitsgründen und zur einfachen Installationwird empfohlen, nur eine Heizschleife an denFunk-Empfänger anzuschließen.Weitere Heizschleifen
sind durch separate Funk-Empfänger (Abb. 6) anzuschließen, welche mit demselben Funk-Raumfühler verbunden werden können.
Alternativ erfolgt die Anbindung über eine externeVerteilungsdose (Abb. 7).
•Falls die Steuerung mittels Pilotleiters verwendet wird, ist die Funktion Pilotleiter im Parametermenü des Funk-Raumfühlers zu aktivieren.
ES
Al receptor se pueden conectar directamente 3600W (16A) – ver dib. 7.
Instrucciones de instalación:
•En el caso de que esté instalado elsensor de suelo, es necesario que se encuentre colocado individualmente en un tubo protector flexible.
•En tal caso es necesario ver si el termóstato () emparejado con el receptor está ajustado de una manera correcta.
•Por motivos de seguridad y por motivosde una instalación fácil recomendamos conectar solamente un ojal calefactor para cada receptor; se pueden utilizar
también otros receptores conectados como unidades dependientes (dib. 6) o utilizar una cajaexterior de instalación (dib. 7).
En el caso de que usted utilice el control por conductor piloto, no olvide activar la función de conductor piloto en el menú de parámetros del termóstato .
SE
Till mottagaren kan max 3600W (16 A) direktanslutas (fig. 7).
Monteringsanvisning:
•Om golvsensor är installerad, måste den placeras i ett separat, flexibelt skyddsrör.*
•I detta fall måste du kontrollera att inställningen på den mottagare som har parats med termostaten är korrekt.
•Av säkerhetsskäl och för enkel montering, rekommenderar vi att du endast ansluteren loop till varje mottagare. Eventuellt kan du tilldela andra mottagare
som slavenheter (fig. 6) eller använda en extern kopplingslåda (fig. 7).
Om installationen använder pilottråd, glöm inte att aktivera pilottrådsfunktionen på termostatens parametermeny.
NL
U kunt rechtstreeks tot 3600 W (16 A) met uw ontvanger aandrijven (afb. 7).
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Watts BT-FR-02 - Wireless Flush Receiver in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.
The manual is 1.22 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
