805476
4
Zoom out
Zoom in
Previous page
1/31
Next page
4
Flush Receiver
Option: Floor Sensor
NTC 10kOhms at 25°C
1. Presentation
- The receiver is a Wall mounting receiver, specially designed to control electrical floor heating regulation in combination or
not with a wireless thermostat type.
- This couple (Thermostat Receiver) can also be managed by a Central to have full control of your heating installation from
one point.
- Possibility to connect a floor sensor directly on this unit (For regulation or floor limitation).
2. Technical characteristics
Environment. (Temperatures)
Operating :
shipping et storage :
0°C - 40°C
-10°C to +50°C
Power supply 230Vac 50Hz
Electrical protection
Class II - IP20
Option: insulation clip for IP21 protection
Pilot wire Input (French market) 6 orders Pilot Wire by phase (L)
Output
Maximum Load
Relay 16Amps 250VAC
Up to 16A - 250Vac 50Hz (2 wires L,N)
Radio Frequency &
RF Receiving distance
868MHz < 10mW (Bidirectional communication)
Range of approximately 100m in open space.
Range of approximately 30m in residential environment.
Optional Floor Sensor NTC 10kOhms at 25°C
EU declaration of conformity
Hereby, Watts Electronics declares that
the equipment is in compliance with the
relevant Community harmonisation
legislation
Directive 2001/95/EC on General Products Safety
Low voltage directive 2006/95/EEC
Radio Equiment Directive 1995/5/EC-2014/53/EU
ROHS Directive 2011/65/EC
The full text of the EU declaration of conformity is available on
wattswater.eu
RF Configuration button
Short press: Instantaneous RF transmission
3sec press: Thermostat or Central RF init.
15sec press: Reset of the receiver.
Status LED (RED/Green)
Green:
Fixed: RF configuration
Flash: RF reception
OFF: Standby
Blink: RF Alarm
Red:
Fixed: Floor Limitation
Red/Green (Orange)
Fixed: Pilot wire information.
Output LED (Red)
Red: Heating demand
Blink: Floor sensor error
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Watts BT-FR-02 - Wireless Flush Receiver at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Watts BT-FR-02 - Wireless Flush Receiver in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 1.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info