- 15 -
Select the setting on the temperature regulator.
When the indicator light goes off, the required temperature is reached. The iron is ready
for use.
To turn off the iron, turn the temperature regulator counter-clockwise to position “OFF”,
set the iron upright, and pull out the power plug.
STEAM IRON
Fill the water tank, as described before initial usage.
Steam ironing can be used in the temperature ranges ●, ●●, ●●● MAX. For the reliable
functioning of the steam ironing, the water tank must be at least ¼ filled.
Spraying function: Press the spray button to moisten a spot to be ironed. Water will came
out of the spray nozzle.
Steam Function: Turn the steam control knob to the required position, steam starts coming
out from the holes in the soleplate.
Burst of steam: Turn the temperature regulator to the position “MAX”. The indicator light
will goes off when the required temperature is reached then press the burst of steam button.
This function provides an extra amount of steam to remove stubborn wrinkles.
The iron surface must always be kept in an upright position.
To turn off, turn the temperature regulator counter-clockwise to “OFF” and pull out the
power plug.
Turn the appliance upside down and carefully pour the remaining water out of the water
tank. Carefully shake the appliance.
Press the spray button to allow possible remaining water to come out more easily.
Notice: With conventional steam ironing, water may leak from the soleplate if a too low
temperature has been selected. If this happens, turn the temperature regulator to the
advised position. Steam will recommence as soon as the appropriate temperature has
been reached.
SELF-CLEAN FUNCTION
You can use the self-clean function to remove scale and impurities.
Use the self-clean function once every two weeks if the water in your area is very hard. The
self-clean function should be used more frequently.
Make sure the appliance is unplugged.
Set the steam control knob to position “OFF“.
Fill the water tank to maximum level.
Select the maximum ironing temperature.
Put the plug in the wall socket.
Unplug the iron when the temperature indicator light goes off.
Hold the iron over the sink, press and hold the self-clean button and gently shake the
iron and fro. (Steam and boiling water will come out of the soleplate. Impurities and
flakes (if any) will be flushed out).
Release the self-clean button as soon as all water in the tank has been used up.
Repeat the self-clean process if the iron still contains a lot of impurities.
