543474

Wanscam Network Phone Camera Manual

23
Zoom out
Zoom in
Previous page
1/26
Next page
WANSCAM Network Phone Camera User Manual
23
to transmit a signal, if the red lamp of two-color LED flashes which indicates learning is
success, after the learning succeed, when the wireless detector is triggered then the red
lamp of two-color LED will be lighted up. Analogously, the device can learn 4 different-code
wireless detectors.
6.2 Remote controller learn code to match the NPC
In order to control the device normally and make or cancel the defense, all the remote
controller must learn code to match the NPC. The specific operation as follows: First quickly
press device learning button twice, when the blue lamp of two-color LED lights up, then
press any buttons of remote controller to transmit a signal, if the blue lamp of two-color LED
flashes which indicates learning is success, after the learning succeed, when press any
buttons of remote controller then the blue lamp of two-color LED will be lighted up.
Analogously, the NPC can learn 4 different-code remote controllers.
7 FAQ and maintenance
7.1 FAQ
If the problems are not listed, please contact local service or call the HQ service, we will
try the best to serve you.
The NPC cannot boot up normally.
Possible reasons are as follows:
The power supply is wrong.
Switch power supply line is not in good connection.
Switch power supply is damaged.
The program updating is wrong.
The front panel is damaged.
The NPC reboots automatically or stops working after boot up a few minutes
Possible reasons are as follows:
The input voltage is not stable or too low
The power of switch power supply is low.
Frontal video signal is not stable
Bad heat radiator or too much dust or bad running circumstance of the NPC.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wanscam Network Phone Camera at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wanscam Network Phone Camera in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info