551984
35
Zoom out
Zoom in
Previous page
1/36
Next page
IPCAM User Manual
- 35 -
Make sure broadcast your SSID; use the same encryption for router and camera. Share key
should not contain special characters, only word and number will be better. Don’t enable MAC
address filter.
4.1.11 Can’t see other cameras which in multi-device when remote access
If you want to view all the cameras in WAN. Make sure that each camera you add in multi-device
settings can be logon use DDNS name and port number. Use DDNS domain name to fill in the
host checkbox, not camera’s LAN IP. (details: How to add cameras in WAN)
4.1.12 Only see black screen or unreasonable code when remote login
If you could access the login page in remote place, it indicates that your DDNS settings are
correct. You could not see living video but only some undefined characters, it may be the internet
speed problems, especially the camera work on Wi-Fi.
4.2 Default Parameters
Default network Parameters
IP address: dynamic obtain
Subnet mask: 255.255.255.0
Gateway: dynamic obtain
DHCP: Disabled
DDNS: Disabled
Username and password
Default administrator username: admin
Default administrator password: No password
4.3 Specifications
ITEMS FI8905W
Image Sensor 1/4" Color CMOS Sensor
Display Resolution 640 x 480 Pixels(300k Pixels)
Lens f: 12mm, F:1.2 (IR Lens)
Image Sensor
Mini. Illumination 0.5Lux
Lens Type Glass Lens
Lens
Viewing Angle 22Degree
Image
Compression
MJPEG
Image Frame Rate 15fps(VGA),30fps(QVGA)
Resolution 640 x 480(VGA), 320 x 240(QVGA)
Flip Mirror Images Vertical / Horizontal
Light Frequency 50Hz, 60Hz or Outdoor
Video
Video Parameters Brightness, Contrast
Ethernet One 10/100Mbps RJ-45
Supported Protocol HTTP,FTP,TCP/IP,UDP,SMTP,DHCP,PPPoE,DDNS,UPnP,GPRS
Wireless Standard IEEE 802.11b/g
Communication
Data Rate 802.11b: 11Mbps(Max.) 802.11g: 54Mbps(Max.)
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wanscam Foscam FI 8905W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wanscam Foscam FI 8905W in the language / languages: French as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wanscam Foscam FI 8905W

Wanscam Foscam FI 8905W User Manual - English - 59 pages

Wanscam Foscam FI 8905W User Manual - German - 28 pages

Wanscam Foscam FI 8905W Quick start guide - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info