543469
11
Zoom out
Zoom in
Previous page
1/25
Next page
Wanscam IPCAM User Manual
10. Running the Search Tool software, If network cable and power supply are correctly
connected, device type, name and IP address will be shown in the Equipments list
(Otherwise, please confirm whether power supply and network cable work normally).
In the picture above, the configuration information of the current computer is listed on
the left side; and the network configuration information of the selected device is listed on
the right side. Default IP address of the IP camera is 192.168.1.99, and HTTP port is 99.
From the Search Tool, Select your IP camera. Here, you will need to re-address your
camera’s IP address based off of your Local Network Default Gateway. For example: If
your Default Gateway is 192.168.1.1, you should change the last set of values of your
address from 1to a larger value such as 99. Therefore, your new address will read
“192.168.1.99” (The last set of values must be lower than 254).
11. Next, change the Gateway and DNS IP address in the network setting to exactly
match your Default Gateway.
12. Now Change the Data Port to 80.
13. Last click “Apply” enter the Username and Password. The Username will be “admin”
and the Password field will remain empty.
14. Last, click “OK” and your camera will automatically reboot as it saves all changes
that you have just mode.
11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wanscam AJ Series IP Camera at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wanscam AJ Series IP Camera in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wanscam AJ Series IP Camera

Wanscam AJ Series IP Camera Quick start guide - English - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info