512346
11
Zoom out
Zoom in
Previous page
1/17
Next page
www.wanscam.com
Shenzhen Wanscam Technology Co.,Ltd
10
3
. Change the camera’s port and set the port forwarding in the
router:
1: Setting the IP address of the camera
The default IP address of the camera is : Http://192.168.1.99:99
The default IP address of
camera you can change to any other one you like, such as:
Change to: 192.168.1.109:109. or 192.168.1.99:90 etc.
Click “Apply”>fill in the user name and password of the camera>click “OK” then the
camera will reboot, wait about 30 seconds. You will get your changed IP address.
Make sure the “Subnet Mask”, “Gateway”, “DNS Server” is the same as your router.
2: Setting Port Forwarding in the router.
This is the most important step. Set port forwarding in router refer to the IP of your camera
correctly, then the DDNS will work. Because there are so many kinds of routers from all
over the world, so it’s difficult to show a fix steps, but there are some samples of different
routers’ port forwarding settings as below, just for reference:
TP-LINK:
(1) Login the router.
(2) Choose “Forwarding”, select “Virtual Servers”
(3) Click the Add New button, pop-up below:
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wanscam AJ-C2WA-C118 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wanscam AJ-C2WA-C118 in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info