533293
18
Zoom out
Zoom in
Previous page
1/68
Next page
18
General
It is common practice for the dealer where you purchased your gas replace to take also care of installing
it and connecting it to the gas mains. If this is not the case, please ensure that the installation is done by a
certied installer. Connecting gas devices by unqualied persons is prohibited, in which case we cannot give
any guarantee that your gas hearth is functioning properly.
Batteries
The batteries of the remote handset and the receiver will last for about one year. We recommend that you use
alkaline batteries.
You need to replace them when the LED of the remote set becomes dimmer and the word BATT appears in
the display.
Replacing the batteries of the remote
Open the lid in the backside cover. Gently remove the 9V block battery and disconnect it from the contact
holder. Avoid pulling the cable. Connect the new battery, replace the set, and close the lid.
Replacing the batteries of the receiver
In case of periods of power failure you can also place batteries in the receiver to allow you to use the stove.
Gently pull the whole receiver from the holder behind the cover frame. Slide the lid open and place 4 new
1.5V batteries (type LR6 of AA). Ensure that you place the batteries into the receiver correctly. Then place the
receiver again in the replace.
We advise that you usually have NO batteries in the receiver as they do have NO function during
normal use.
Setting the remote control handset
Once the batteries are placed, you need to set the electronic code (only
when using it for the rst time). Press the reset button on the receiver until
you hear 2 acoustic signs, and then release the reset button. Then press
the small ame button d within 20 seconds until you hear a long acoustic
signal to conrm that the code has been set.
!
M
NO
P
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wanders Square 60G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wanders Square 60G in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wanders Square 60G

Wanders Square 60G Additional guide - English, German, Dutch, French - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info