533292

Wanders Square 40G Manual

21
Zoom out
Zoom in
Previous page
1/64
Next page
21
GB
Setting the desired temperature
Press and hold the AUTO button until the TEMP indication blinks. You can set a higher temperature with the
button and a lower temperature with the button. Then wait a few seconds, or press the AUTO button to
switch to the automatic modus.
Checking the set temperature
Briey press the AUTO button. The display briey shows the pre-set temperature and then displays the room
temperature.
TIMER
You can pre-set a total of four time-settings. When you link up all four time-settings, you can be sure of a
comfortable room temperature at all times.
Press and hold the TIMER button until the indication P1<> blinks. With the and buttons you can set
respectively the hours and the minutes. By briey pressing the TIMER button you can browse through the
timer programme P1<>, P1<>, P2<> and P2<>. Here is an example of a possible pre-setting.
P1<>-temp: 07:30 - 08:30 the pre-set temperature
P1<>-temp: 08:30 - 17:00 o
P2<>-temp: 17:00 - 23:00 the pre-set temperature
P2<>-temp: 23:00 - 07:30 o
The TIMER function works only when the pilot ame is on. If the TIMER mode is switched on, the temperature
control will be the same as in the AUTO position. You can switch o the TIMER mode with the and
buttons. The remote control will automatically switch to the MAN function.
MAN
When the display shows the MAN position you can manually turn the hearth higher and lower by using
the big buttons. When you press and hold the button the hearth will go to its lowest position: the pilot ame.
When you keep these buttons pressed, you will see the ‘transmit’ symbol top left in the display. You will know
when the hearth has reached its highest or lowest position when the LED of the receiver starts blinking.
Maintenance
Small maintenance
You can clean the outside of the hearth with a damp cloth that doesn’t give o u. Only clean the outside
when the hearth is cold. If some coee is spilled on the unit when it is burning, turn the hearth o immediately.
When the hearth has cooled o completely, you can remove any stains with a damp cloth
Do not use any aggressive cleansing agents or abrasives and do not use stove polish.
Annual maintenance
Your gas hearth needs to be checked and maintained by a certied installer at least once a year. He will check
and, if necessary, clean the following components:
• The air-tightness of the exhaust pipes for gas and fumes and the pipes for supplying combustion air.
• The proper functioning of the gas governor, the thermocouple interrupter (a safety measure against un-
expected outow of gas) and the ignition of the main burner.
• The entire pipe system, including the exterior wall or roof duct and the external terminal.
• Inspection of possible wear and tear of the sealing of the doors and glass panes.
• The following components will be cleaned: the main burner, the pilot light, the ue tube and the supply of
combustion air. Any dust collected in the hearth can be removed with a vacuum cleaner.
!
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wanders Square 40G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wanders Square 40G in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wanders Square 40G

Wanders Square 40G Additional guide - English, German, Dutch, French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info