533642
17
Zoom out
Zoom in
Previous page
1/65
Next page
16
Your Square stove at a single glance
The Square 60
The Square is a combination of comfort and efficient
heat emission. The large glass panes allow emission
of the heat from the stove directly to the environment
to make your room instantly comfortable. The built-in
flue gas deflector ensures circulation of flue gases in the
interior parts. Combined with the extra after-burning, it
means that the flue gases have better combustion and
reduce the burden on the environment. You can regulate
the intake of combustion air with the integrated air slide
valve and adjust the intensity of the fire and the output
of your stove.
Installation
It is common practice for the dealer where you purchased
your Square stove to also take care of installing it. If this
is not the case, please ensure that the installation is done
by a certified installer. A certified installer can also give
you the right advice about the flue pipe to which the stove
must be connected. Connecting wood-burning stoves
by unqualified persons is prohibited, in which case we
cannot give any guarantee about proper functioning of
your Square stove. Please bear the fire safety in mind
when installing the stove. See also page 21.
The wood-burning stove is suitable as an extra heat
source and does not replace your principal heating
device.
Lighting the stove
The stove will become very hot when you light it and
will need at least two hours to cool off. Don’t touch the
stove without protection during firing and for two hours
after. Handle the stove always with a glove to avoid
getting serious burns.
Before lighting the fire, you must clean away any deposits
on the window pane with a paper from a kitchen roll.
The same paper can be used for lighting the fire.
Open the combustion air inlet. Open the slide to its
maximum before lighting the stove. Then open the door
and put some balls of paper or firelighters in the stove
and place some wood kindling on top. Light the kindling
and leave the stove door ajar (for 3 to 5 minutes) for
extra air supply and enhancing chimney draught. Once
the kindling has caught fire you can add extra wood.
(Put the logs loosely on the fire so that the flames can
catch on all around).
How the air valve works
The air valve has 3 positions:
1. Opened all the way: the primary and secondary air
supply is open.
2. Pressed until the first click is heard: only the sec-
Lighting your stove early in autumn or late in
winter
When the external and internal temperatures do
not differ much, a proper chimney draught is a real
challenge. You can help chimney draught get started
by burning some wood while keeping all air inlets
maximally open. An abundant air supply speeds up
quick heating which in turn increases the draught
in the chimney. Lighting up the stove with only a
little wood prevents smoke from streaming into the
room.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wanders Square - Hout at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wanders Square - Hout in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info