694500

Wanders Ruby Manual

32
Zoom out
Zoom in
Previous page
1/64
Next page
32
GB
extra air supply and enhancing chimney draught. Once the kindling has caught  re you can add extra wood. (Put
the logs loosely on the  re so that the  ames can catch on all around).
How the air valve works
The air slider has three settings, i.e.
1. entirely extended, primary, secondary and tertiary air supply will open.
2. press until  rst click, only secondary and tertiary air supply will open, the stove will now have the highest
e ciency and the window pane rinser will work best
3. press until second click, everything closes and stove will slowly shut down.
It is prohibited to light the stove with liquids like petrol or spirits.
Do not have the cooker hood on in the room where you operate your stove.
Never touch the varnished parts when you heat your stove.
Avoid  nger marks
Do not touch the glass of the stove with your  ngers. Finger marks will burn into the glass and cannot be removed
later.
Lighting the stove for the  rst time
Discolouration of walls, ceilings and grates
The walls, ceilings and grates may show some discolouration after lighting your stove. This is caused by the
dust particles that burn in the convection cover. WANDERS cannot be held responsible for this natural process.
To minimize discolouring we refer to the advice given for atmospheric hearths. Your installer can give you more
information about this.
When you light the Ruby for the  rst time, the hearth must still ‘anneal’ and temper itself. The unit has a heat
resistant lacquer which must burn in the stove at temperatures above 400 °Celsius. This will happen during the
rst few times of lighting the stove and temperatures rise to 600 °C. Though this may give an unpleasant smell, it
is otherwise harmless. It is advisable to keep the stove burning with limited fuel for at least 6 hours when lighting
the stove for the  rst 4 or 5 times. Air the room well when the stove is burning. Make sure that any cooking hood
is not turned on when the stove is burning; a cooking hood extracts the combustion air that the stove needs.
Some deposit may form on the glass panes of the stove when you ‘anneal’ your hearth. You can easily remove this
deposit with a damp cloth after the stove has cooled down. You can also use some cleansing agent for ceramic
rings. Please make sure you do not leave any  nger marks on the clean glass. Finger marks burn into the glass and
cannot be removed later.
Newly built house or recently renovated?
It is advisable to wait six weeks before lighting the stove in a newly built house that has recently been completed,
or in a space that has recently been renovated drastically. The walls and ceilings still contain gases, softeners and
moisture from plasterwork or paint. The warm air-streams may discolour the dust particles in the space, which
may stick to walls and ceilings. Even the moisture in the walls and ceilings will become warm and may cause
yellow stains.
1 2 3
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wanders Ruby at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wanders Ruby in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info