Manual Wanders Peppel (page 14 of 48) (English, German, Dutch, French)

694508

Zoom out

Zoom in

1/48

Your Peppel stove at a single glance

The Peppel is a combination of comfort and ecient

heat emission. The large glass panes allow emission of

the heat from the stove directly to the environment to

make your room instantly comfortable. The built-in ue

gas deector ensures circulation of ue gases in the

interior parts. Combined with the extra after-burning,

it means that the ue gases have better combustion

and reduce the burden on the environment. You

can regulate the intake of combustion air with the

integrated air slide valve and adjust the intensity of

the re and the output of your stove.

Installation

It is common practice for the dealer where you purchased your Peppel stove to also take care of installing it. If this is not the

case, please ensure that the installation is done by a certied installer in accordance with the installation instructions and

national and currently applicable local regulations

. A certied installer can also give you the right advice about the ue

tube to which the stove must be connected. Connecting wood-burning stoves by unqualied persons is prohibited, in which

case we cannot give any guarantee about proper functioning of your Peppel stove. Please bear the re safety in mind when

installing the stove. See also page 19.

The wood stove is intended for extra heating and does not replace a proper central-heating system.

The wood stove is suitable and approved for occasional use. Continual use leads to a shorter life span of the

product.

The wood stove may not be modied in any way without the written permission of the manufacturer.

Lighting the stove for the rst time

Discolouration of walls, ceilings and grates

The walls, ceilings and grates may show some discolouration after lighting your stove. This is caused by the dust

particles that burn in the convection cover. WANDERS cannot be held responsible for this natural process. To

minimize discolouring we refer to the advice given for atmospheric hearths. Your installer can give you more

information about this.

When you light the Peppel for the rst time, the hearth must still ‘anneal’ and temper itself. The unit has a heat resistant lacquer

which must burn in the stove at temperatures above 400 °Celsius. This will happen during the rst few times of lighting the

stove and temperatures rise to 600 °C. Though this may give an unpleasant smell, it is otherwise harmless. It is advisable to

keep the stove burning with limited fuel for at least 6 hours when lighting the stove for the rst 4 or 5 times. Air the room well

when the stove is burning. Make sure that any cooking hood is not turned on when the stove is burning; a cooking hood

extracts the combustion air that the stove needs.

Some deposit may form on the glass panes of the stove when you ‘anneal’ your hearth. You can easily remove this deposit

with a damp cloth after the stove has cooled down. You can also use some cleansing agent for ceramic rings. Please make sure

you do not leave any nger marks on the clean glass. Finger marks burn into the glass and cannot be removed later.

Newly built house or recently renovated?

It is advisable to wait six weeks before lighting the stove in a newly built house that has recently been completed,

or in a space that has recently been renovated drastically. The walls and ceilings still contain gases, softeners and

moisture from plasterwork or paint. The warm air-streams may discolour the dust particles in the space, which

may stick to walls and ceilings. Even the moisture in the walls and ceilings will become warm and may cause

yellow stains.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wanders Peppel in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wanders Peppel Manual

Product: