533281
19
Zoom out
Zoom in
Previous page
1/49
Next page
18
2.9.5 Using various options
Manual adjustment of the height of the ames.
Press ()toswitchonthereortoincreasetheheightoftheames;press()todecreasetheames
ortoswitchtothepilotameofthestove.
When pressing these buttons, the ‘send’ sign will appear in the upper left corner of the display. When
the gas valve has reached its maximum position, the LED of the receiver will start blinking to indicate
that the highest or lowest position is reached.
AUTO temperature adjustment
Press AUTObrieyandthedisplaywillindicatetheprogrammedtemperaturetobefollowedbythe
temperature in the room.
2.9.6 Timer (TIMER)
If the timer mode is switched on, the temperature control is the same as in the AUTO mode. When the
switch-offtimesarereached,themotorswitchestheappliancetothepilotame.
Press AUTO to check the temperature settings and return to the TIMER mode.
There is no temperature control when the time is switched off; this will minimize battery consumption.
By pressing the () or the () button, you will reach manual operation from any mode.
We recommend that you switch off with the () button, as the transmitter will then be inactive and will
not use the battery unnecessarily.
2.9.7 Changing the battery
The battery needs to be changed when BATT appears in the top right corner of the display, or when the
LED light on the receiver becomes less bright.
2.9.8 Safety switch-off
If the receiver has not received any signal for two hours, the unit will switch automatically to the pilot
amemodeandwillswitchonagainassoonasasignalisreceived.
2.9.9 Directions
Before switching to AUTO or TIMER you must test reception with the () and () buttons (when the
‘send’symbolappearsonthetransmitter,theLEDonthereceiverwillash).
Withthetemperatureadjustment,theheightoftheamesisprogrammedduringthetimethatthemotor
is running. The time depends on the size of the room where the unit is placed, on the capacity of the
unit, on the power of the battery, and so on.
A microprocessor measures the increase in temperature per time, and adjusts the running time of the
motorduringthenextheatingperiodtoadjusttheheightoftheamestoyourneeds.
If the room can be heated in a lower position, the hearth will burn in a lower position or turns off
when the hearth is burning on the automatic position. This gives longer burning times and a regular
temperature.
Required batteries: 1x 9V alkaline for the remote control and 4x AA 1.5V penlight receiver
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wanders Orsanne at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wanders Orsanne in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wanders Orsanne

Wanders Orsanne Additional guide - English, German, Dutch, French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info