533285

Wanders Cocos Manual

20
Zoom out
Zoom in
Previous page
1/68
Next page
20
Setting the height of the ames
t After igniting the burner, the height of the ames will automatically reach the maximum position.
t Press button d continuously to lower the ames and to switch o the burner (putting the re out: “STAND
BY”). Press button d briey to gradually lower the ames.
t Press button c to increase the ame height. Briey press button c to gradually increase the ames.
Switching o the appliance
t Press button d to lower the ames and to switch o the burner.
t Then press “OFF” button e to switch o the entire unit, including the pilot ame.
t If the appliance is not used for a longer period it is advisable that you turn o the gas valve in the gas pipe.
Important: if the pilot ame has gone out for whatever reason, you must wait at least 5 MINUTES
before lighting the pilot ame again.
Failure
If it looks as if the signals of the remote control are not properly received by the stove (receiver), it may be
caused by:
t Empty batteries: change the batteries.
t An electronic problem: solve it by pressing the “RESET” button on the receiver.
t If the appliance often switches o you should contact your installer.
Control (manual control)
If the batteries are due for replacement or if the receiver is defect, you can also operate the hearth by hand.
To do so, you need to disconnect the ignition (piezo) cable of the receiver and slide it gently onto the piezo
connection of the gas control block.
Lighting the re and putting it out
1. Open the gas stopcock which is mounted in the gas pipe leading to
the appliance.
2. Press “O I” switch g on the gas control block in the “I” position.
3. Turn motor switch i on the gas control block all the way to the right.
The switch will make a ticking sound.
4. Turn operating switch h on the gas control block in the MAN
position; an orice j becomes visible.
5. Push the metal pin in the orice with something like a small pen. The
gas will now ow to the pilot.
6. While keeping the metal pin pressed in, press the (square) ignition
fuse k (next to the “O I” switch) to ignite the pilot ame. Look through
the glass to see whether the pilot ame is burning.
7. If the pilot ame is burning, keep the metal pin pressed for another
10 seconds and then release it. If the pilot ame dies, wait for another
5 minutes before repeating the above steps.
8. Turn operation knob h to the “ON” position.
9. Turn motor switch i to the left to ignite the burner and to select the
height of the ames.
10. Turn motor switch i all the way to the right to put out the re; the pilot ame will keep burning.
11. If you want to put out the pilot ame as well, turn “O I” switch g to the “O” position.
12. Close the gas tap.
!
R
Q
T
U
S
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wanders Cocos at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wanders Cocos in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wanders Cocos

Wanders Cocos Additional guide - English, German, Dutch, French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info