Manual Wanders Black Stealth (page 23 of 64) (English, German, Dutch, French)

533283

Zoom out

Zoom in

1/64

the replace to be red with another kind of gas.

Wanders cannot be held responsible for any cracks in stuccoed walls or discolouration of walls, ceilings and/or

grates after burning the replace. Discolouration is caused by the burning of dust particles in the convection

cover. To reduce the chance of cracks in stucco and to minimize discolouration we refer to the advice given for

decorative hearths. Your installer can give you more information.

Any complaints will be dealt with after the sales rm, the installer or the gas company led a complaint and

sent a copy of the purchase receipt with purchase date. Any repairs do not entitle you to extend the guarantee

term. All consequential damages or loss are excluded.

Installation instructions Stealth gas

Your gas hearth must only be installed by a certied installer and only in combination with the WANDERS

concentric pipe system. Only then will the hearth be approved according to the European CE standards for

gas appliances. We will not give any guarantees if the gas hearth is tted and/or installed in an incomplete or

improper manner. The pipe system consists of an inner pipe with a diameter of 100 millimetres and an outer

pipe with a diameter of 150 millimetres.

The appliance may only be installed and tted by a certied installer in accordance with current universal

gas piping regulations and according to the installation instructions mentioned below. Furthermore, the

national and local rules and regulations on placing and using closed gas appliances shall be applicable. Only

certied installers are authorized to change the pre-set values (in line with the regulations) or make any other

adjustments.

Before installing the appliance, the installer must check whether the information on the type tag of

the replace corresponds with the gas type and gas pressure to which the appliance is connected. If it

does not match, it is not allowed to connect the gas unit.

Placing

The appliance is designed to be mounted on a wall which should be strong enough to hold the weight of the

appliance. All materials used in the area of the hearth need to be heat and re resistant.

The appliance can be placed in a crack-free and/or mechanically ventilated home without diculty. There is no

need for extra ventilation for combustion, or for a smoke and re vent. Waste gases are discharged by natural

draught via the inner pipe into the open. The oxygen needed for burning the re is supplied from the space

between the pipes. This is the reason that no insulation must be placed between the inner and the outer pipe.

Insulation

Due to the high temperatures of the exterior walls (up to approximately 150 °C or 300 °F) it is prohibited to

have any combustible materials close to the channel system. The entire concentric pipe system should be

encased (heat resistant) from the place where it is out of sight up to the outlet in the exterior wall. Ventilate the

encased concentric pipe system by placing a grid near the oor and the ceiling on every oor. Use universal

wall clips with a diameter of 150 mm for anchoring the concentric pipe system.

If an existing chimney is used, rst make sure whether the chimney is suciently insulated and with sucient

diameter to accommodate the concentric pipe system. If the chimney was previously used as a wood-

burning or coal-red stove, the chimney must rst be professionally cleaned. You must use special WANDERS

connecting sets for connecting a gas hearth to an existing chimney.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wanders Black Stealth in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wanders Black Stealth

Wanders Black Stealth Additional guide - English, German, Dutch, French - 1 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wanders Black Stealth Manual

Product: