533308
25
Zoom out
Zoom in
Previous page
1/64
Next page
25
GB
Follow the instructions given in the previous chapter (Preparation) before installing the stove. Protect the oor
during mounting the stove, and mind your back.
Mounting the standing model
1. Check whether the wall in front of which the hearth is placed is adequately re-proof. Please read the text
in the chapter on ‘Fire Safety on page 24.
2. Check the packaging of the stove and the base. Do not mount a stove or a base that has been damaged in
the box. If there is any damage, please report to WANDERS.
3. Be careful when unpacking the stove and protect the oor while unpacking: the mouth of the tube
underneath the stove has a sharp edge.
4. Remove the glass plate from the hearth to avoid any damage.
5. If you need an extra air supply connection to the hearth please read the section on “Mounting the
connection to the external air supply on page 26.
6. Protect the oor and carefully turn the stove on its backside.
7. Remove the four screws on the bottom side.
8. Take the base from the box and remove the clipped-on front plate from the base.
9. Fasten the base to the stove with the four screws.
10. Lift the stove carefully in an upright position, and put it in the right place, but mind your back.
11. Connect a separate air supply duct, if necessary (minimum diameter: 100 mm). You can use the connection
at the bottom.
12. Click the front piece of the base back in its place.
13. Fasten the top of the hearth to the wall. Never use any synthetic fastenings.
14. Put the glass plate back on the stove.
15. Then mount the ue gas duct overlappingly.
Mounting the suspended model
1. Check whether the wall in front of which the hearth is placed is adequately re-proof. Please read the text
in the chapter on ‘Fire Safety on page 24.
2. Check the packaging of the stove and the base. Do not mount the stove or the base that has been damaged
in the box. If there is any damage, please report to WANDERS.
3. Be careful when unpacking the stove and protect the oor while unpacking: the mouth of the tube
underneath the stove has a sharp edge.
4. Remove the glass plate from the hearth to avoid any damage.
5. Fasten the suspension clip to the wall. Never use any synthetic fastenings. Be sure to place the clip exactly
beneath the centre of the outlet and to hold the hooks face upward. The fastening bolts should not
protrude more than 10 mm from the wall.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wanders Black Diamond at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wanders Black Diamond in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wanders Black Diamond

Wanders Black Diamond Additional guide - English, German, Dutch, French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info