Manual Wamsler W3-90 (page 43 of 116) (English, German, French, Italian)

813243

Zoom out

Zoom in

1/116

Please observe the following NOTES:

Check that the start damper has been shut for at least 60 minutes. This ensures an even

temperature throughout the oven. Only put in enough fuel to reach the desired tempera-

ture. This temperature can then be maintained by adding small amounts of fuel during the

roasting period. After half the roasting time take the baking tray out of the oven and turn

over the roast, and replace in oven. This will ensure you get evenly roasted or baked

goods.

3.5 Closing down

Close the primary air regulator (Table 2).

Let the embers burn out and leave the stove to cool down.

Once the stove is cold, empty and clean out the fire chamber and ash pan!

3.6 Notes on heating

A properly adjusted secondary air flow ensures that any combustible elements in the flue

gases are burned off. This means they are burned in a way which reduces the smoke and

soot released into the environment. it is always possible that the window glass will be-

come dirty and this does not mean there is a malfunction.

If you use your stove in the spring or autumn, you must check the draw of your chimney

first, as if the outside temperatures are high this can drop off substantially. To do this hold

a burning match in the fire door when it is partially opened. If the flame is not clearly drawn

inwards, then you first need to light a starter fire. Do this by briefly burning some wood

shavings in the stove or the cleaning opening of the chimney itself.

The grid must be cleaned before placing any fuel on it, in order to ensure a good supply of

air to the burning material. The ash pan must be emptied regularly, when it is cold. If the

stove is still hot, use the gloves provided. Please make sure that no glowing embers are

put into your dustbin.

Take care that the ash pan is pushed in until it touches the rear wall.

PLEASE NOTE:

In the interests of clean air and safe functioning of the stove do not exceed the

maximum quantities of fuel. Otherwise there is a risk of overheating, which can

damage the stove. Damage of this kind is not covered by the guarantee. Reduced

heating should only be achieved by reducing the quantity of fuel, never by reducing

the primary airflow.

3.7 Care and cleaning

3.7.1 Cooker (Fig. 4)

After opening the fire door the grid must be cleaned using the soot scraper and the fire iron

before adding fuel.

The ash pan (1) should be emptied daily. The grid should be scraped clean of cinders at

least every third day.

By using/managing and caring for/cleaning your stove properly you enhance its value and

prolong its useful life. You save valuable resources and spare both the environment and

your wallet. The hob plates (2) and heating plates (3) should be removed for cleaning and

cleaned free from soot. By removing the hob and heating plates the flue gas channel and

the flue pipe inside the stove can also be cleaned. By loosening the screw of the cleaning

cover (4) the lower part of the flue gas channel around the oven can also be cleaned.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wamsler W3-90 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3.26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wamsler W3-90 Manual

Product: