Manual Wamsler W1-40 (page 31 of 104) (English, German, French, Italian)

813263

Zoom out

Zoom in

1/104

1.3 Instructions

For installation and for connection of flue, the requirements of the Fire

Regulations (FeuVO in Germany) apply, as well as local building regulations

such as the following technical standards DIN 18896, DIN 4705, EN 13384,

DIN 18160, EN 1856-2 and EN 15287. In order for the stove to function

correctly the chimney to which you want to connect the stove must be in good

condition.

1.4 Surrounding space

The stove draws the air required for burning from the surrounding room. You

must ensure that sufficient air can be drawn in through non-sealed windows

and outside doors. In addition you must ensure that a room volume/heat

capacity ratio of at least 4 m³ per kW nominal heat capacity is available. If the

volume is less than this, then air vents can be used to provide access to further

air supply in other rooms (connecting vents min. 150 cm²).

1.5 Air supply

A constant supply of oxygen or air is required for the combustion process.

Normally the air available in the room where the stove is installed will be

sufficient.

If the windows and doors are well insulated, if mechanical air extraction

mechanisms are present ( e.g. in a kitchen or bathroom) or if there are other

sources of fire (including gas boilers) in the home, then the supply of available

air can be significantly impacted. If this is the case, the option exists to draw in

air for burning directly from outdoors or from another, well-ventilated room (e.g.

a cellar).

The stoves provide a built-in air supply opening in the base, Ø 80 mm.

For the air supply you must use only smooth pipes with a minimum diameter of

80 mm. A shutoff valve must be placed in the air supply close to the stove,

which must be installed professionally, at the bends there must be inspection

openings for the local authority responsible for approving heating systems and

it must be professionally sealed against condensation. The pipe must not

be longer than 4 m and must not have more than 3 bends. If the pipe exits out-

of-doors, then it must have appropriate wind protection and be covered by a

mesh.

NOTE: In the room where the stove is installed or in the neighbouring

rooms there must not be any air extractors or similar equipment.

These could cause considerable operating problems and even

represent a risk. Consult the local authority responsible for

approving heating systems.

NOTE: The room where the stove is to be installed must not have

equipment such as extractor hoods, ventilation systems etc. which

could mean that that room or neighbouring rooms have reduced air

pressure.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wamsler W1-40 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wamsler W1-40 Manual

Product: