Manual Wamsler N-Line (page 22 of 92) (English, German, French, Italian)

813187

Zoom out

Zoom in

1/92

SAFETY INSTRUCTIONS

1. This equipment has been certified under the requirements of standard

EN 13240 (see the model plate).

2. For setting purposes and connection to the chimney, the fire protection re-

quirements as prescribed in the given locations, as well as standards DIN

4705, DIN 18160, DIN 18896, EN 13384, EN 1856-2 and EN 15287 should

be complied with. For the problem-free functioning of the equipment, the

chimney that the fireplace is to be connected to has to be in perfect condi-

tions (mainly Germany).

3. Before the first commissioning and connection to the chimney, these user

instructions are to be read thoroughly, and the competent chimney sweeper

has to be informed.

4. It is recommended to use clean cotton gloves for the setting of the equip-

ment in order to avoid the appearance of fingerprints that would be hard to

eliminate later on.

5. In order to keep the air clean and maintain the equipment properly, the

maximum fuel quantities specified in these safety instructions may not be

exceeded, and the doors of the equipment have to be kept closed, otherwise

the equipment may overheat, leading to damage. No guarantee is provided

for such damage.

6. During operations, the doors of the equipment are to be kept always closed.

7. Permissible fuels:

- natural wood (max. 25 cm in length)

- brown coal briquette (see user instructions)

8. Never use liquid igniters. Use special ignition materials or wood wool for the

kindling of the fire.

9. Never use wastes, fine wooden chips, mulch, coal debris, particle board

wastes, wet wood or wood treated with wood-protective agents, paper or

cardboard or similar materials for burning.

10. Upon the first kindling, smoke and unpleasant smell may be generated. Al-

ways ensure the proper ventilation of the room (by opening windows and

doors), and heat the fireplace at maximum rated heating performance. If

with the first heating the maximum temperature is not reached, the above-

mentioned effects may as well arise later on.

11. The operating elements and adjustment units are to be used as described in

these user instructions. If the equipment is hot, use auxiliaries or protective

gloves for the handling of the equipment.

12. When opening the furnace chamber door, any incorrect handling or insuffi-

cient draught may induce smoke. Always ensure that the furnace chamber

door may be opened only slowly, first just to a small extent, and then fully af-

ter a few seconds. In addition, if you intend to put additional fuel into the fire,

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wamsler N-Line in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wamsler N-Line Manual

Product: