813256
35
Zoom out
Zoom in
Previous page
1/40
Next page
35
remaining water to evaporate and so prevents rust forming. Take care that you do not use
water to clean the stove when it is cold.
Expansion joints in the steel hob plate must always be cleaned free of adhesions, to avoid
deforming the steel hob plate and the side panels. If necessary the edge of the cover
should also be cleaned of any adhesions.
3.7.5 Changing the light bulb
The light bulb in the oven is exposed to high temperatures. Although it is a special kind of
bulb, it can still burn out in time. You just need to replace it with the same type of bulb
(15 W - 240 V - 300°C).
Before changing it make sure that the stove is not in use, that it is cold and that the bulb
has not been switched on. Unplug the electrical cable and check that there is no current
present. To change the bulb, remove the protective cover, change the bulb and replace the
bulb protector.
PLEASE NOTE:
Before opening the bulb protector, disconnect the stove from the mains!
Work such as installation, setup, commissioning and servicing, as well as repairs, must
only be carried out by qualified personnel (heating system or space heating technicians).
Intervention by non-qualified persons invalidates the warranty and guarantee.
3.8 Troubleshooting
Your stove has been built using modern technology.
Even so, problems can arise, which may derive from the chimney, the fuel or the flue pipe
system. There may briefly be smoke and an unpleasant smell the first time you use the
stove: this is normal. Make sure the room is sufficiently well ventilated.
PROBLEM
CAUSE
SOLUTION
Pane of glass in the
fire chamber is cov-
ered in soot and/or
the fire chamber is
dirty and black from
smoke
Not enough chimney draught
< 10 Pa
Too high
chimney draught
(temporarily max. 18 Pa al-
lowed)
Check whether the connection
piece is blocked
Change the connection: more
draught with a suitable throttle
damper or improve the insulation
Wrong settings
See the sections on “Use” and
“Fuel”
Too much fuel
Reduce the fuel quantity
Fuel with too high relative hu-
midity
Let damp wood dry out before burn-
ing
Unsuitable fuel
Look up section on “Fuels”
No regular draught
Chimney draught not suitable or
chimney dirty
Chimney sweep
Dirt inside stove or pipes
Cleaning
Emission of too
much black smoke
Lighting/Running the stove with
wood which is too green
Use better quality wood which has
been stored to dry
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wamsler M90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wamsler M90 in the language / languages: English, German as an attachment in your email.

The manual is 1.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info