Manual Wamsler Linz (page 25 of 84) (English, German, French, Italian)

813203

Zoom out

Zoom in

1/84

Filling quantities 6 kW

- Split billet: max. length: 25 cm, max. 2 billets per filling, appr. 1,4 kg

- Lignite briquette: max. 1,7 kg

Filling quantities continuos combustion:

- Lignite briquette: max. 5,8 kg

IT IS NOT ALLOWED to burn waste, fine chipping, bark, wood handled with preven-

tive chemicals, furthermore paper and cardboard. For kindling please use wood scrap-

ings or grill starter but never use liquid auxiliaries!

The first kindling

• At the first fire set-up could be a little smoke, but is not dangerous, normal!

In this time, please ventilate the room carefully!

Warning! Upon the first kindling, smoke and unpleasant smell may be gener-

ated. Always ensure the proper ventilation of the room (by opening windows

and doors), and heat the fireplace at maximum rated heating performance. If

with the first heating the maximum temperature is not reached, the above-

mentioned effects may as well arise later on.

• Before installation pull out the delivery securer off the refractory brick through the

furnace chamber (picture 6).

Open the door by raising the handle (picture 2). If the equipment is hot, you can use

insulated gloves. Adjust the primary air regulator and the fuel switch (picture 3) ac-

cording to the Table 2. Put coal lighter or wood wool onto the fire grate, followed by

wood chips. First insert small pieces of wood, and then larger ones, light them and

close the door again. When the wood burns quickly, and leaves sufficient glowing

embers, put additional fuel on the fire. Thereafter, adjust the primary air regulator and

the fuel switch according to the Table 2 („Adjustment of the burning air”). The first

kindling should be performed “finely” with little fuel only, so that the parts of the fire-

place are adapted to heat. During the first kindling, the generation of smell is normal

and absolutely undangerous.

1.3 Putting out of operation

• Let the glowing ember burn to ashes and the fire-place get cold.

• Empty the furnace chamber and the ash bin.

• Close the doors, and shut off the primary air regulator (position I) and the fuel

switch (position K).

1.4 Heating instructions

The fireplace should be operated only with closed furnace chamber door. Fireplaces

belonging to type 1 have self-locking furnace chamber doors. These doors may be

opened only for kindling, loading or when cleaning the furnace chamber (otherwise

draught problems may occur with other equipment connected to the same chimney).

Warning!

When opening the furnace chamber door, any incorrect handling or insufficient

draught may induce smoke. Always ensure that the furnace chamber door may

be opened only slowly, first just to a small extent, and then fully after a few sec-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wamsler Linz in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wamsler Linz Manual

Product: