Manual Wamsler KF 198 57 (page 31 of 82) (English, German, French, Italian)

531875

Zoom out

Zoom in

1/82

Floor in front of and under the fireplace

Floors made from combustible materials, such as carpets, parquet floors or cork is to

be protected by a shield of non-combustible material – for example ceramics, stone,

glass or steel – placed under the fireplace so that it should reach out to 50 cm in front

and 30 cm besides.

2.4 Connection of the fireplace

WARNING:

Before connecting the fireplace to the chimney, seek advice from the competent

chimney sweeper!

The connecting elements should be attached to the equipment and to each other in a

properly sealed and stable manner. They may not hang into the unobstructed cross-

section of the chimney. The interconnecting piece between the chimney and the fire-

place should be of the same cross-section size as the pipe stub of the fireplace. Hori-

zontal connecting pieces should ascend to the chimney in 10°. Pipes that are not

heat-protected or not led vertically may not be longer than 1 m.

There should be a minimum distance of 40 cm kept between the connection pieces of

the fireplace and combustible materials in the building. Provided that the interconnect-

ing pieces have a non-combustible coating of minimum 2 cm, the distance from com-

bustible materials may be at least 10 cm. If the interconnecting pieces are led through

equipment or furnishing made from combustible materials, they have to be covered

with a protecting tube made from any non-combustible material in a distance of at

least 20 cm, or they have to be coated with any non-combustible material with low

heat conductance in a minimum range of 20 cm.

Smaller distances to combustible materials are permissible if it is ensured that at the

rated performance of the fireplace the temperature cannot rise over 85°C at the com-

bustible equipment and furnishings.

WARNING:

The connection of the fireplace to the chimney is not permissible if the effective height

of the chimney is less than 4 m, or 5 m with multiple loading (see the details of chim-

ney calculations on page 36).

To the chimney that the fireplace uses, a maximum of two other fireplaces, ovens may

be connected.

The fire-place can usually be jointed

to the chimney with an arch.

With weak chimney draught, the

fireplace is to be connected to the

chimney through a vertical flue gas

pipe facilitating discharge.

The fireplace can usually be

connected to the chimney with an

angle pipe.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wamsler KF 198 57 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wamsler KF 198 57 Manual

Product: