Manual Wamsler KF 101 (page 28 of 74) (English, German, French, Italian)

531882

Zoom out

Zoom in

1/74

Floor in front of and under the fireplace

Floors made from combustible materials, such as carpets, parquet floors or cork is

to be protected by a shield of non-combustible material – for example ceramics,

stone, glass or steel – placed under the fireplace so that it should reach out to

50 cm in front and 30 cm besides.

2.4 Connection of the fireplace

WARNING:

Before connecting the fireplace to the chimney, seek advice from the compe-

tent chimney sweeper!

The connecting elements should be attached to the equipment and to each other in

a properly sealed and stable manner. They may not hang into the unobstructed

cross-section of the chimney. The interconnecting piece between the chimney and

the fireplace should be of the same cross-section size as the pipe stub of the fire-

place. Horizontal connecting pieces should ascend to the chimney in 10°. Pipes

that are not heat-protected or not led vertically may not be longer than 1 m.

There should be a minimum distance of 40 cm kept between the connection pieces

of the fireplace and combustible materials in the building. Provided that the inter-

connecting pieces have a non-combustible coating of minimum 2 cm, the distance

from combustible materials may be at least 10 cm. If the interconnecting pieces are

led through equipment or furnishing made from combustible materials, they have to

be covered with a protecting tube made from any non-combustible material in a

distance of at least 20 cm, or they have to be coated with any non-combustible

material with low heat conductance in a minimum range of 20 cm.

Smaller distances to combustible materials are permissible if it is ensured that at

the rated performance of the fireplace the temperature cannot rise over 85°C at the

combustible equipment and furnishings.

WARNING:

The connection of the fireplace to the chimney is not permissible if the effective

height of the chimney is less than 4 m, or 5 m with multiple loading (see the details

of chimney calculations on page 30).

To the chimney that the fireplace uses, a maximum of two other fireplaces, ovens

may be connected.

The fireplace can usually be

connected to the chim

ney with

an angle pipe

With weak chimney draught, the

fireplace is to be connected to

the chimney through a vertical

flue gas pipe facilitating dis-

charge.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wamsler KF 101 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wamsler KF 101 Manual

Product: