813249
34
Zoom out
Zoom in
Previous page
1/116
Next page
34
Adjustable grate support (for K128 / K138)
1.3 Instructions
For installation and for connection of flue, the requirements of the Fire Regulations
(FeuVO in Germany) apply, as well as local building regulations such as the following
technical standards DIN 18896, DIN 4705, EN 13384, DIN 18160, EN 1856-2 and EN
15287. In order for the stove to function correctly the chimney to which you want to
connect the stove must be in good condition.
1.4 Place of installation
The stove draws the air required for burning from the surrounding room. You must
ensure that sufficient air can be drawn in through non-sealed windows and outside
doors. In addition you must ensure that a room volume/heat capacity ratio of at least 4
m³ per kW nominal heat capacity is available. If the volume is less than this, then air
vents can be used to provide access to further air supply in other rooms (connecting
vents min. 150 cm²).
1.5 Air supply
A constant supply of oxygen or air is required for the combustion process. Normally the
air available in the room where the stove is installed will be sufficient.
NOTE: In the room where the stove is installed or in the neighbouring rooms there
must not be any air extractors or similar equipment. These could cause
considerable operating problems and even represent a risk. Consult the
local authority responsible for approving heating systems.
NOTE: The room where the stove is to be installed must not have equipment such
as extractor hoods, ventilation systems etc. which could mean that that
room or neighbouring rooms have reduced air pressure.
1.6 Safe distances
Ensure that the walls at the sides and behind the range are not constructed of
flammable material and/or clad or coated in flammable material, if they are less than
35 cm K 118 and 40 cm K 128/138 of the side from the combustion chamber, and
25 cm K 118 and 30 cm K 128/138 of the side from the oven. Plastic or wooden
furniture or similar must also be kept at a distance of more than 20 cm K118 and 30 cm
K 128/138 from the back of the range.
No flammable or heat sensitive material should be within 50 cm (80 cm K128 F/K138 F)
of the front of the range in its field of radiation.
If there is a floor covering or a floor in front of the fire door opening which is flammable
or otherwise sensitive to heat then it should be covered with a layer on non-sensitive or
flammable building material. The layer must cover an area of 50 cm from the front of the
fire door opening and also a minimum of 30 cm either side of it. Wall mounted
cupboards over the range must have a minimum clearance of 70 cm from the hob plate
of the range.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wamsler K 138 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wamsler K 138 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info