Manual Wamsler Gea (page 19 of 74) (English, German, French, Italian)

531901

Zoom out

Zoom in

1/74

SAFETY INSTRUCTIONS

1. This equipment has been certified under the requirements of stan-

dard DIN EN 13240 or DIN EN 12815 (see the model plate).

2. For setting purposes and connection to the chimney, the fire protec-

tion requirements as prescribed in the given locations, as well as

standards DIN 4705, DIN EN 13384, DIN EN 1856-2 and DIN EN 15287

should be complied with. For the problem-free functioning of the

equipment, the chimney that the fireplace is to be connected to has

to be in perfect conditions (Germany).

3. Before the first commissioning and connection to the chimney,

these user instructions are to be read thoroughly, and the compe-

tent chimney sweeper has to be informed.

4. It is recommended to use clean cotton gloves for the setting of the

equipment in order to avoid the appearance of fingerprints that

would be hard to eliminate later on.

5. In order to keep the air clean and maintain the equipment properly,

the maximum fuel quantities specified in these safety instructions

may not be exceeded, and the doors of the equipment have to be

kept closed, otherwise the equipment may overheat, leading to dam-

age. No guarantee is provided for such damage.

6. During operations, the doors of the equipment are to be kept always

closed.

7. Permissible fuels:

- natural wood (max. 35 cm in length)

- brown coal briquette (see user instructions)

8. Never use liquid igniters. Use special ignition materials or wood

wool for the kindling of the fire.

9. Never use wastes, fine wooden chips, mulch, coal debris, particle

board wastes, wet wood or wood treated with wood-protective

agents, paper or cardboard, or similar materials for burning.

10. Upon the first kindling, smoke and unpleasant smell may be gener-

ated. Always ensure the proper ventilation of the room (by opening

windows and doors), and heat the fireplace at maximum rated heat-

ing performance. If with the first heating the maximum temperature

is not reached, the above-mentioned effects may as well arise later

on.

11. The operating elements and adjustment units are to be used as de-

scribed in these user instructions. If the equipment is hot, use auxil-

iaries or protective gloves for the handling of the equipment.

12. When opening the furnace chamber door, any incorrect handling or

insufficient draught may induce smoke. Always ensure that the fur-

nace chamber door may be opened only slowly, first just to a small

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wamsler Gea in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wamsler Gea Manual

Product: