813212
30
Zoom out
Zoom in
Previous page
1/83
Next page
30
Floors made from combustible materials, such as carpets, parquet floors or cork is
to be protected by a shield of non-combustible material – for example ceramics,
stone, glass or steel – placed under the fireplace so that it should reach out to
50 cm in front and 30 cm besides.
2.4 Connection of the fireplace
WARNING:
Before connecting the fireplace to the chimney, seek advice from the
competent chimney sweeper!
The connecting elements should be attached to the equipment and to each other in
a properly sealed and stable manner. They may not hang into the unobstructed
cross-section of the chimney. The interconnecting piece between the chimney and
the fireplace should be of the same cross-section size as the pipe stub of the
fireplace. Horizontal connecting pieces should ascend to the chimney in 10°. Pipes
that are not heat-protected or not led vertically may not be longer than 80 cm.
There should be a minimum distance of 40 cm kept between the connection pieces
of the fireplace and combustible materials in the building. Provided that the
interconnecting pieces have a non-combustible coating of minimum 2 cm, the
distance from combustible materials may be at least 10 cm. If the interconnecting
pieces are led through equipment or furnishing made from combustible materials,
they have to be covered with a protecting tube made from any non-combustible
material in a distance of at least 20 cm, or they have to be coated with any non-
combustible material with low heat conductance in a minimum range of 20 cm.
Smaller distances to combustible materials are permissible if it is ensured that at
the rated performance of the fireplace the temperature cannot rise over 85°C at the
combustible equipment and furnishings.
WARNING:
The connection of the fireplace to the chimney is not permissible if the effective
height of the chimney is less than 4 m, or 5 m with multiple loading.
To the chimney that the fireplace uses, a maximum of two other fireplaces, ovens
may be connected.
The fireplace can usually be
connected to the chimney with
an angle pipe
With weak chimney draught, the
fireplace is to be connected to
the chimney through a vertical
flue gas pipe facilitating
dischar
g
e.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wamsler COLORADO DELUXE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wamsler COLORADO DELUXE in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info