Manual Wamsler 10189 (page 28 of 94) (English, German, French, Italian)

531917

Zoom out

Zoom in

1/94

1.6 Potential problems and how to tackle them

Kind of operating

problem

Possible reasons Solution

Odour formation Curing of the applied pre-

ventive lacquer.

Steaming oil remains.

Operate the fire-place on a

low heating level according

to the instructions manual

for a few hours. Then heat

up for maximal performance

for a few hours.

Too little heating per-

formance

• We chose too little

performance

• Chimney draught is

slight

• Have the heating re-

quirement of the room

examined by an expert

• Chimney draught shall

be at least 12 Pa, max.

for a short time 18 Pa.

• Check the tightness of

your chimney and also

that the doors of other

fire-places leading to

the same chimney are

closed and sealed

properly. Make sure

that the chimney-

cleaning joints are

sealed properly.

• Too long and leaky

smoke tube

• All the smoke tube

joints must be well

sealed and fireproof-

isolated

• Leakage at the door

glass

• Check the sealing,

close the door properly.

May have to have the

tightening flap re-

newed.

• Usage of wet wood. • Use well dried wood

only.

Actions to be in chimney fire

Chimney fire may occur upon the improper cleaning of the chimney, the use of

inappropriate fuels (e.g. excessively wet wood) or the inadequate setting of the

burning air. In such cases, close the burning air at the fire, and call the fire service.

Never try to extinguish the fire with water!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wamsler 10189 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wamsler 10189 Manual

Product: