802056
49
Zoom out
Zoom in
Previous page
1/76
Next page
49
Adding chargers in the future:
If you anticipate adding chargers to the system in the future, there are two ways you
can prepare the system now to make it ready for Power Sharing.
Option 1: Place a bus disconnecter to accommodate future chargers as
shown in the option 1 wiring scheme below. This option avoids the need of
reopening the existing chargers and hence it is the recommended option.
Option 2: Truncate the existing bus to add new charger(s) as shown in the
option 2 wiring scheme below.
1. Open the charger following the installation guide of your Pulsar Plus,
Copper SB, or Commander 2 charger.
2. Set the terminating resistance into NT, make the communication wiring as
explained above and then close the charger.
New chargers may be placed anywhere physically in relation to the existing
chargers as long as you follow these rules:
• You maintain the logic of the daisy chain.
• You respect the cabling polarity as described above under “Installation”.
Wherever a future added charger is placed, the most important rule to
follow is the logic of the daisy chain. For example, in the image below, the
new charger is placed before the Terminating charger on the right side of
the daisy chain.
Power Sharing
WIRING THE SYSTEM WITH EXISTING INSTALLATIONS
Important
NT NT
TT
T T
NT
NEW
Option 2:
Option 1:
NT NT
TT T
NT
Open this existing chargers New charger as a (T)
T
NEW
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wallbox EMS - Energy Management System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wallbox EMS - Energy Management System in the language / languages: English as an attachment in your email.

The manual is 2.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wallbox EMS - Energy Management System

Wallbox EMS - Energy Management System User Manual - Dutch - 121 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info