776707
13
Zoom out
Zoom in
Previous page
1/34
Next page
13
EN
1. Unscrew the union nut.
2. Press the lock and remove the lter basket.
3. Press the lock and remove the lter sponge.
4. Press the lock and remove the large lter basket.
5. Remove the bottom.
6. The ow rate can now be adjusted via the blue control valve.
7 Turn the motor housing and then remove it.
8. Remove the rotor and clean it.
9. Make sure that the o-ring is always in the correct position, as shown in
gure 7.
Note: In winter, take the pump out of the water and store it in a frost-free
environment, if possible in a container lled with water, to prevent the
O-ring from drying out and . Clean the pump carefully and check for any
damage after reassembly.
TROUBLESHOOTING
Problem Possible cause Suggested solution
Pump does not work. No power. Plug in.
Burned. Allow device to cool down.
Rotor is blocked. Clear blockages.
Running without water. Plug in again and add
water.
Noise. Filter housing is blocked or
shaft is broken.
Clean blockages after
opening.
Ceramic shaft or bearing:
Wearing occurs.
Change the shaft or
bearing.
Insufcient water
displacement.
Impeller broken. Change impeller.
Flow rate valve closed. Open the ow rate valve.
Filter housing is clogged. Clean blockages and
plug in.
Low voltage. Change to right voltage.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Waldbeck 10033394 Fontanica S45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Waldbeck 10033394 Fontanica S45 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info