Manual Waldbeck 10029320 Beaufort (page 40 of 136) (English, German, French, Italian, Spanish)

776439

Zoom out

Zoom in

1/136

Note: Next to the antenna there is

an arrow symbol with the inscription

"WEST" (Figure 9). The sensor

body must be adjusted so that the

inscription "WEST" is aligned in true

west direction at your location. It

is recommended to use a compass

device to adjust the direction. A

permanent wind direction error will

occur if the outdoor sensor is not

installed in the correct direction.

Now look at the spirit level. The bubble should be completely inside the red

circle. Otherwise, wind direction, speed and rain values cannot be measured

correctly or accurately. Adjust the mounting tube if necessary. If the bubble

is close to but not quite inside the circle and you cannot adjust the mounting

tube, you may need to experiment with small wooden or heavy cardboard discs

between the sensor package and the top of the mounting column to achieve

the desired result (this requires loosening the screws).

Make sure that you check the western alignment as the last assembly step and

correct it if necessary, and now tighten the screws with a spanner.

Reset button and LED

Press and hold the RESET button (see gure 10) with a bent paper clip to

return the unit to its initial state: The LED lights up while the RESET button

is pressed and you can now release it. The LED should then light up normally

again and ash approximately every 48 seconds.

Reset buon

LED

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Waldbeck 10029320 Beaufort in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 6.41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Waldbeck 10029320 Beaufort Manual

Product: