GB
15
W 550
Preparing the Coating Material
The paints usually need to be diluted for use with the spray gun. Since information on
sprayable dilutions is seldom given on the material tin, you can use the guidelines in the
viscosity table on the following page (viscosity = consistency of the coating material).
Measuring the Viscosity
1. Stir the coating material thoroughly before measuring.
2. Dip the viscosity test cup (Fig. 2.) completely into the coating material.
3. Hold the test cup up and measure the time in seconds until the liquid empties out.
This time is called "Runout Time in Seconds".
Viscosity Table
Spray Material Runout Time in Seconds
Thinner-soluble primers 25 - 30
Thinner-soluble varnishes 15 - 30
Water-soluble primers 25 - 30
Water-soluble varnishes 20 - 25
Wood preservatives, strippers, oils undiluted
Disinfectants, plant protectants undiluted
Automobile spray paint 20 - 25
Description (Fig. 1)
1 Air cap 6 Spray gun rear part
2 Nozzle 7 Material volume adjustment
3 Union nut 8 Air filter cover
4 Spray gun front part 9 Mains lead
5 Trigger guard 10 Container
Technical Data
Max. Viscosity: 30 DIN-s
Voltage: 230 - 240 V
Power consumption: 280 W
Atomisation power: 65 W
Double insulation:
Sound pressure level: 74 dB (A)
Oscillation level: < 2,5 m/s²
Weight: 1,3 kg