579198
43
Zoom out
Zoom in
Previous page
1/86
Next page
GB
35
Flexio 580 I-Spray
Problem Cause Remedy
Atomisation too
coarse
Coating material too thick
•
Material volume too large
•
Material volume adjusting screw
turned too far to the right (+)
Nozzle contaminated
•
Air lter heavily soiled
•
Too little pressure build-up in
•
container
Amount of air too low
•
Dilute
Turn material volume
adjusting screw to the
left (-)
Clean
Change
Tighten container
Increase air quantity
(Level II)
Spray jet pulsates Coating material in container
•
running out
Air lter heavily soiled
•
Nozzle seal is missing or worn
•
Rell
Change
Insert an intact nozzle
seal
Coating material
causes "paint tears"
Too much coating material
•
applied.
Turn material volume
adjusting screw to the
left (-)
Too much fog of
coating material
(Overspray)
Distance to the object too large
•
Too much coating material
•
applied
Amount of air too high
•
Reduce distance
Turn material volume
adjusting screw to the
left (-)
Decrease air quantity
(Level I)
Paint in the
ventilating hose
Diaphragm soiled
•
Diaphragm defective
•
Clean the diaphragm
Replace the diaphragm
Poor covering
capacity on the wall
Spray material is too cold
•
Highly absorbent surface or paint
•
with poor covering capacity
Distance too large
•
The material you are
spraying should be at
room temperature
Cross spray (Fig. 11)
Closer to the object
Device does not
function
Device overheated
•
Unplug the power
plug, let the device
cool down approx. 30
minutes, check the air
lter, do not cover the
intake slots
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wagner FLEXiO 580 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wagner FLEXiO 580 in the language / languages: Dutch as an attachment in your email.

The manual is 14,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info