573660

Waeco PerfectView M7L Monitor Manual

32
Zoom out
Zoom in
Previous page
1/248
Next page
Mounting the LCD monitor PerfectView M5L, M7L, M7LX
EN
32
Observe the following instructions when laying the connection cable:
Feed the connection cable through existing ducts or other openings where possible,
e. g. ventilation grilles. If no suitable ducts or openings are available you will need to
drill a hole of ∅ 20 mm. Check beforehand that there is sufficient space on the other
side for the drill head to emerge (fig. <Waeco<Waeco>2, page 3).
To prevent damage to the cables, when laying them ensure that there is always a
sufficient interval to vehicle components which can become hot (lights, heaters, ven-
tilators etc.).
Wrap insulating tape around every connection on the cable (even inside the vehicle).
When laying the cables, make sure:
– they are not kinked or twisted
– they do not rub on edges
– they are not laid in sharp-edged ducts without protection
(fig. <Waeco<Waeco>3, page 3).
Connecting the monitor as a reversing video system (fig. <Waeco<Waeco>d,
page 7)
➤ Lay the connection cable for the monitor bracket on the dashboard.
➤ Insert the plug of the monitor cable (2) into the socket (4) of the connection cable (3).
A
➤ Connect the red and black cables of the connection cable to a suitable voltage sup-
ply:
– Connect the red cable (5) to terminal 15 (ignition).
– Connect the black cable (6) to terminal 31 (earth).
➤ If the monitor is to be activated when reverse gear is selected, connect the green ca-
ble (8) to the positive cable of the reversing light.
I
➤ If the monitor is to be activated e. g. when the indicator is flashing, connect the fol-
lowing control cable to a positive cable of the indicator:
– M5L, M7L: white cable (8)
– M7LX: white cable (8), blue cable (13)
I
NOTICE! Risk of damage
Make sure the polarity is correct when connecting to a voltage source.
NOTE
If voltage is present in the green cable (8), the reversing camera will be activat-
ed automatically. The reversing camera has priority.
NOTE
If voltage is present in this control cable, the following video input will be acti-
vated:
M5L, M7L: video input C2
M7LX: video input C2, video input C3
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Waeco PerfectView M7L Monitor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Waeco PerfectView M7L Monitor in the language / languages: All languages as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info