Manual Waeco PerfectView M7L Monitor (page 29 of 248) (All languages)

573660

Zoom out

Zoom in

1/248

PerfectView M5L, M7L, M7LX Mounting the LCD monitor

7 Mounting the LCD monitor

7.1 Tools required (fig. <Waeco<Waeco>1, page 2)

For installation and assembly you will require the following tools:

 Measuring ruler (4)

 Centre punch (5)

 Hammer (6)

 Drill bit set (7)

 Drill (8)

 Screwdriver (9)

To make and test the electrical connection, the following tools are required:

 Diode test lamp (1) or voltmeter (2)

 Insulating tape (10)

 Heat shrinking sleeve

 Hot air blower (11)

 Crimping tool (12)

 Soldering iron, if required (13)

 Solder, if required (14)

 Cable bushing sleeves, if necessary

To fasten the cables, you may require additional cable binders.

7.2 Installing the monitor

Observe the following installation instructions:

 Select an installation location that provides an unobstructed view of the monitor

(fig. <Waeco<Waeco>6, page 3 and fig. <Waeco<Waeco>7, page 3).

 Never install the monitor in areas where your head may impact or in the area that would

be filled by an expanding airbag. This could cause injury if the airbag opens.

 The monitor may not impair your vision when driving (fig. <Waeco<Waeco>8,

page 4).

 The installation location should be flat.

 Check that there is sufficient room underneath the installation location to attach the

washers and nuts.

 Check beforehand that there is sufficient room for the drill head to come out on the

other side (fig. <Waeco<Waeco>2, page 3).

 Bear in mind the weight of the monitor. Provide reinforcement if necessary (larger

washers or plates).

 Ensure that you can lay the connection cables to the monitor.

CAUTION! Risk of injury!

Select the location of the monitor so that it cannot injure anybody in the vehicle

under any circumstances (e.g. sudden braking, road traffic accidents).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Waeco PerfectView M7L Monitor in the language / languages: All languages as an attachment in your email.

The manual is 1,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Waeco PerfectView M7L Monitor Manual

Product: