517885

Waeco PerfectControl MPC 01 Manual

29
Zoom out
Zoom in
Previous page
1/228
Next page
PerfectControl MPC01 Operating the MPC01
EN
29
Connecting the battery sensor
I
In “boat” and “caravan” operating modes, the consumer batteries A, B and C can be con-
nected in addition to the motor battery.
In “boat” operating mode, the battery connection IBS_B2C is not factored into the calcu-
lation of the total current and voltage shown in “Supply batteries overview”. As a rule, the
battery sensor for the sideshift bow thruster should be plugged into battery
connection IBS_B2C.
➤ Connect the battery sensor connection cable (fig. 1 6, page 3) to the battery sensor
(fig. 1 5, page 3).
➤ Connect the battery sensor to the negative pole of the battery.
➤ Clamp the blue cable of the connection cable of the battery sensor (fig. 1 6, page 3)
onto the positive pole of the battery (voltage supply).
➤ Plug the red cable with the white plug connection onto the corresponding CI bus con-
nection on the adapter board (fig. 5 6–10, page 3).
Connecting the MPC01 to the voltage supply
➤ Plug the cable lug end of the red cable (fig. 1 10, page 3) onto the left contact of the
voltage supply connection of the adapter board (fig. 5 3a, page 5).
➤ Connect the end of the red cable with the round cable lug to the positive battery pole.
➤ Plug the cable lug end of the black cable (fig. 1 9, page 3) onto the right contact of
the voltage supply connection of the adapter board (fig. 5 3b, page 5).
➤ Connect the cable lug eye of the black cable to the consumer unit connection contact
of the battery sensor on a negative battery pole (fig. 6 1, page 5).
Connecting power consuming devices to the battery sensor
➤ Always connect the negative pole of the power consuming devices to the correct con-
nection on the battery sensor (fig. 6 1, page 5).
8 Operating the MPC01
Navigating within the menu
Navigate through the menus as follows:
➤ Turn the selector button (fig. 2 2, page 3) to scroll through the individual pages in the
menu or through the items appearing on one page of the menu.
➤ Press the selector button to access the sub-menus or change mode.
➤ Turn the selector button until the message “Press to return” appears and then press
the selector button.
✓ This will return you to the “Main menu”.
The following four figures show how you can navigate within the menu:
NOTE
The battery sensor requires a rest period of approximately 8 hours for calibra-
tion.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Waeco PerfectControl MPC 01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Waeco PerfectControl MPC 01 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info