Manual Waeco PerfectCharge MCA1250 (page 56 of 464) (All languages)

639099

Zoom out

Zoom in

1/464

Connecting the device MCA1215 – MCA2440

8.5 Setting the DIP switches

You can adjust the device using the DIP switch.

S1 is used to set the voltage at which the device switches over from the

I phase (bulk) to the U0 phase (absorption) (also see chapter “Battery charg-

ing function” on page 48). S3 must be set to “OFF”.

S2 is used to set the retention voltage. S3 must be set to “OFF”.

When a battery sensor is connected, the output voltages is adapted to the

temperature for these two functions:

 MCA 12xx: –20 mV/°C

 MCA 24xx: –40 mV/°C

S3 activates the power mode when either S1 or S2, or both, are set to “Off”.

In power mode, the short circuit, overvoltage and overheating protection are

controlled by the internal sensor.

When S1, S2 and S3 are set to “On”, then the function control by external

devices is activated. Among others the type of battery and the charging

voltage are set using the external device in this mode.

S4 regulates the fan function. When S4 is set to “On”, then the fan is switched

to sleep mode (noise-reduced mode). When S4 is set to “Off”, then the fan is

not regulated.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Waeco PerfectCharge MCA1250 in the language / languages: All languages as an attachment in your email.

The manual is 3,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Waeco PerfectCharge MCA1250 Manual

Product: