639110
30
Zoom out
Zoom in
Previous page
1/260
Next page
EN
Mounting the converter PerfectCharge/PerfectPower
30
5.1 Control elements
6 Mounting the converter
6.1 Mounting instructions
If you wish to mount the converter in a fixed position, please observe the fol-
lowing mounting instructions:
You can mount the device either horizontally or vertically.
Do not mount the device
In wet or damp environments
In the vicinity of combustible materials
In areas where there is a danger of explosions
The place of installation must be well-ventilated. A ventilation system
must be present for installations in small, closed spaces. The minimum
clearance around the device must be at least 5 cm (fig. 2, page 3).
No. in
fig. 1,
page 3
Explanation
1 Output terminals
2 “Power On” LED: There is voltage at the output terminals on the con-
verter. The converter is ready for use.
3 “Battery Low” LED: The input battery is no longer sufficiently
charged.
4 “Overload” LED:
If a consumer is connected: The converter is shorted or over-
loaded.
If connected as a charger: The converter is in the full current
charging phase.
5 Air outlet
6 Main switch
7 Red: Positive cable to input battery
Black: Negative cable to input battery
8 Connection for switching on with on-board voltage (e.g. ignition or
external switch)
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Waeco PerfectCharge DC40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Waeco PerfectCharge DC40 in the language / languages: All languages as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info