517866
46
Zoom out
Zoom in
Previous page
1/340
Next page
EN
Connecting the inverter SinePower
46
!
Install a residual current circuit breaker in the socket distribution circuit.
9.6 Setting the earthing bridge (fig. 5 5, page 4)
Remove the earthing screw from the bottom hole.
Screw the screw into the top hole.
9.7 Connecting the MCR-7 or MCR-9 remote control
(accessory)
A
Connect the remote control (accessory) to the remote port (fig. 5 12,
page 4).
9.8 Connect external switch to turn device on and off
I
You can use the following as an external switch:
external switch, voltage supply from the inverter: fig. 8, page 6
Control unit with relay or transistor circuit (TR): fig. 9, page 6
external switch with voltage supply from the battery (BAT) of the vehicle:
fig. 0, page 6
external switch with its own voltage supply (DC POWER) e.g. from the ig-
nition: fig. a, page 6
WARNING! Danger of electrocution!
If you wish to connect more than one appliance to the inverter and
install a socket distribution circuit, you must arrange a circuit
breaker (residual current circuit breaker) and set a grounding
bridge in the inverter.
NOTICE!
Only plug in the connection to the remote control in the remote
port. The device can be damaged by connecting it incorrectly.
Ensure that the remote control and inverter are supplied with
the same input voltage.
Follow the instruction manual of the remote control.
NOTE
Use cables with a cable cross section of 0.25 – 0.75 mm².
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Waeco MSI2312T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Waeco MSI2312T in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info