583165
38
Zoom out
Zoom in
Previous page
1/68
Next page
Installing the LCD monitor LCD Monitor
38
6.3 Connecting the monitor to the voltage supply
Observe the following instructions when laying out the connection cable:
Where possible, use existing ducts or other bushings for the
cable, e.g. a ceiling lamp. If there are no existing ducts, you must
drill a hole of Ø 18 mm. Check beforehand that there is sufficient
room for the drill head to emerge once the hole has been made.
Cables and connections which are not installed properly will
cause malfunctions or damage to components. Correct installa-
tion of cables and connections is the basic prerequisite for lasting
and trouble-free operation of the retrofitted components.
z To prevent damage to the cables, when laying them ensure that there is
sufficient distance to hot or moving vehicle components (lights, heaters,
ventilators etc.).
z Wrap insulating tape around every connection on the cable (even inside
the vehicle).
z When laying electric connections, ensure that
They are not kinked or twisted
They do not rub on edges
They are not laid in sharp edged ducts without protection (see fig. 3,
page 4)
CAUTION!
When connecting to an interior light fitting note that the monitor
has a maximum power consumption of 30 W. The cable must be
fused with at least 5 A.
Connect the monitor connection cable as follows:
Red cable (fig. 10.13, page 7) to 12 V DC.
The voltage source must be switched on independently of the ignition
so that the LCD monitor is not switched on unintentionally when the
vehicle is started.
Black cable (fig. 10.14, page 7) to terminal 31 (earth –).
If necessary, drill an 18 mm hole in the ceiling of the vehicle.
Grind all drill holes that have been made in the sheet metal and apply rust-
protection.
RV-RMM-153_de_en_dk.book Seite 38 Freitag, 23. Januar 2004 2:20 14
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Waeco MOBITRONIC RV-RMM-153 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Waeco MOBITRONIC RV-RMM-153 in the language / languages: English, German, Danish as an attachment in your email.

The manual is 2,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info