639093

Waeco MCR-7 Remote Control Manual

9
Zoom out
Zoom in
Previous page
1/36
Next page
MCR-7 Connection
9
3 Connection
➤ Insert one side of the RJ-11 cable in the socket “To inverter” (fig. 2 2, page 3).
➤ Insert the other side of the RJ-11 cable into the “Remote Port II” of the inverter.
Switching on/off by external signal
The remote control enables the optimal switching on/off of the inverter by external signal:
➤ Loosen both Phillips screws and take off the cap (fig. 2 1, page 3).
➤ Set the desired connection on the jumper (fig. 2 3, page 3):
– Jumper open (A): Switching offinverter-by positive batteryvoltage
When a plus-signal is present on the control cable, the inverter is switched off.
(suitable e. g. for roof air conditioners). If no signal is received, then the inverter
works in the previously activated function.
– Jumpers are connected (B): Switching on inverter by positive battery voltage
When a plus signal is present on the control cable, the inverter is switched on,
and remains on as long as the plus signal is present.
➤ Put on the cap (fig. 2 1, page 3).
e
Caution!
The control cable has to be secured by a suitable fuse (≤ 1A.)
➤ Connect the control cable (12 V or 24 V) at the (fig. 2 4, page 3) remote control-
connection.
4 Service
➤ With the “On/Off” button (fig. 2 2page 3) switch the inverter on or off.
✓ An acoustic signal sounds.
5 Disposal
➤ Place the packaging material in the appropriate recycling waste bins wherever pos-
sible.
If you need to scrap the device, ask your local recycling centre or specialist deal-
er for details about how to do this in accordance with the applicable disposal reg-
ulations.
Versions, technical modifications and delivery options are subject to alteration.
MCR-7.book Seite 9 Mittwoch, 30. Januar 2008 11:48 11
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Waeco MCR-7 Remote Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Waeco MCR-7 Remote Control in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info