660345
32
Zoom out
Zoom in
Previous page
1/296
Next page
EN
Technical description PerfectCharge MCP04/07
32
6 Technical description
The battery charger charges batteries that are used as a source of voltage
on board vehicles or boats, or supplies them with a float charge voltage to
ensure they are not discharged.
The service life of most lead batteries is reduced by sulphation: lead sulphate
forms into large, smooth crystals over the course of time and the amorphous,
spongy structure disappears. The ability to recharge and therefore the charg-
ing capacity gradually decreases and the battery ages.
The battery charger operates using specific frequencies in parts of its charg-
ing curve. This causes the crystals to vibrate in their resonant frequency.
They decompose into their amorphous structure. Their molecules can be
integrated back into the charging process which in turn increases the charg-
ing voltage, starting current and the capacity of the battery again.
All lead batteries are protected from premature ageing by regular charging
using the battery charger.
The battery charger can be operated in three operating modes:
Mode 1: Charge mode with 14.4 V
This mode is used for lead, gel and maintenance-free batteries.
Mode 2: Charge mode with 14.7 V
This mode is used for AGM batteries.
Mode 3: Voltage supply with 13.7 V (battery is not connected)
This mode is used as a power supply function, e.g. for supplying voltage
to the vehicle in the event of replacing a battery, or during maintenance
work using service devices.
The device can be installed on a wall using the wall bracket for stationary
storage (accessory).
Furthermore, an external battery indicator (accessory) can be used. This
shows the battery capacity and can be connected to the battery permanently
using a connection cable with cable lugs. When it indicates the battery is
empty, the battery charger can be connected to the battery indicator and the
battery can be charged directly.
The battery indicator can be attached to a wall or to a wall bracket for the
battery charger using a wall bracket.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Waeco MCP04-07 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Waeco MCP04-07 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info