517875
27
Zoom out
Zoom in
Previous page
1/140
Next page
PerfectCharge / PerfectPower Using the converter
27
6.2 Mounting the converter
Hold the converter against the installation location and mark the fastening
points (fig. 3 A, page 3).
Fasten the converter using your chosen method (fig. 3 B, page 3).
7 Using the converter
Connecting the input battery
Warning!
Do not reverse the polarity. Reverse polarity of the battery
connections can cause injury and irreversably damage the device.
Note
Tighten the nuts or bolts to a torque of 12 – 13 Nm. Loose
connections may cause overheating.
Set the main switch (fig. 1 6, page 3) to “0f”.
Lay the positive cable (fig. 1 7, page 3) from the converter to positive
terminal of the battery and connect it.
Lay the negative cable (fig. 1 8, page 3) from the converter to negative
terminal of the battery and connect it.
Connecting the output load to the converter
Loosen the screw (fig. 4 2, page 4) in the positive terminal (fig. 4 4,
page 4).
Push the cable lug (fig. 4 3, page 4) of the positive cable on the output
load into the positive terminal (fig. 4 4, page 4) and fasten it with the
screw (fig. 4 2, page 4) and the split washer (fig. 4 1, page 4).
Connect the negative cable of the output load in the same way to the
negative terminal (fig. 4 5, page 4).
_DC Power Booster.book Seite 27 Mittwoch, 11. April 2007 8:31 08
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Waeco DCDC40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Waeco DCDC40 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info