Manual Waeco DC40 (page 27 of 140) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

517872

Zoom out

Zoom in

1/140

PerfectCharge / PerfectPower Using the converter

6.2 Mounting the converter

➤ Hold the converter against the installation location and mark the fastening

points (fig. 3 A, page 3).

➤ Fasten the converter using your chosen method (fig. 3 B, page 3).

7 Using the converter

Connecting the input battery

Warning!

Do not reverse the polarity. Reverse polarity of the battery

connections can cause injury and irreversably damage the device.

Note

Tighten the nuts or bolts to a torque of 12 – 13 Nm. Loose

connections may cause overheating.

➤ Set the main switch (fig. 1 6, page 3) to “0f”.

➤ Lay the positive cable (fig. 1 7, page 3) from the converter to positive

terminal of the battery and connect it.

➤ Lay the negative cable (fig. 1 8, page 3) from the converter to negative

terminal of the battery and connect it.

Connecting the output load to the converter

➤ Loosen the screw (fig. 4 2, page 4) in the positive terminal (fig. 4 4,

page 4).

➤ Push the cable lug (fig. 4 3, page 4) of the positive cable on the output

load into the positive terminal (fig. 4 4, page 4) and fasten it with the

screw (fig. 4 2, page 4) and the split washer (fig. 4 1, page 4).

➤ Connect the negative cable of the output load in the same way to the

negative terminal (fig. 4 5, page 4).

_DC Power Booster.book Seite 27 Mittwoch, 11. April 2007 8:31 08

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Waeco DC40 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Waeco DC40 Manual

Product: