517972
48
Zoom out
Zoom in
Previous page
1/120
Next page
Montaje de la cámara PerfectView
48
Si desea fijar el soporte inferior de la cámara a la estructura mediante tornillos
roscados:
a
¡Atención!
Asegúrese de que al apretar las tuercas, éstas no se incrusten en la estructura.
En caso necesario, utilice arandelas y placas de chapa de mayor tamaño.
Realice una perforación de Ø 5,5 mm en cada uno de los puntos que haya marcado
anteriormente.
Lije todas las perforaciones realizadas y aplíqueles un antioxidante.
Coloque la placa de aislamiento (fig. 3 5, página 3) en el lugar de montaje del so-
porte inferior de la cámara.
La placa de aislamiento sirve también como obturación y protector de la pintura.
Atornille el soporte inferior de la cámara con los tornillos roscados M5 x 25 mm
(fig. 7 A, página 5).
Según sea el grosor de la estructura, necesitará tornillos roscados de mayor o menor
longitud.
Fijar la cámara
Coloque la cámara en el soporte inferior.
I
Nota
Preste atención a que el sensor LDR (fig. 4 5, página 4) quede hacia abajo
para que en el monitor se pueda ver correctamente la imagen.
Fije la cámara al soporte superior con los dos tornillos M3 x 12 mm (fig. 7 B,
página 5) de forma que quede floja.
I
Nota
No apriete los tornillos hasta que no haya alineado la cámara (véase capítulo
“Comprobación del funcionamiento y ajuste de la cámara” en la página 49).
Para ello deberá montar primero un monitor y conectarlo eléctricamente (ver es-
quema básico de conexiones fig. 9, página 5).
Realizar la apertura para el paso del cable de alimentación de la cámara
I
Nota
Como canal de paso para el cable de alimentación utilice, siempre que sea po-
sible, posibilidades ya existentes, como p. ej., rejillas de ventilación. Si no exis-
ten canales de paso, deberá taladrar un agujero de Ø 13 mm. Compruebe
previamente si existe el espacio libre suficiente para la salida del taladro.
Perfore un agujero de Ø 13 mm cerca de la cámara.
Lije todas las perforaciones realizadas en la chapa y aplíqueles un antioxidante.
Impermeabilice el canal de paso con el manguito protector (fig. 4 3, página 4).
CAM30_CAM40.book Seite 48 Donnerstag, 14. Januar 2010 5:32 17
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Waeco CAM30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Waeco CAM30 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info